Abstract:3D printing of metallic microstructures is highly desirable for many practical applications such as microelectronics, terahertz photonics, microelectromechanical systems, and electrochemisty. Unfortunately, high resolution microprinting of 3D metal structures with widely tunable feature sizes, high conductivities, high melting points, and highly smooth surfaces remains challenging for current microfabrication technologies. Herein, 3D printing of metallic microstructures of feature sizes ranging from ≈10 to ≈200 μm by combining femtosecond laser micromachining of 3D glass microchannels and microfluidic electroless plating is demonstrated. The proposed technique allows for producing 3D metallic structures of almost arbitrary geometries embedded in glass since the continuous flow of the plating solution enables controllable deposition of metal films inside the through microchannels. Moreover, freestanding metallic 3D microstructures are fabricated by removing the glass matrix with a wet chemical etching. As a nonthermal processing, the surface roughness of the fabricated metallic structures is as low as ≈20 nm. The 3D microstructures can be made of either silver or copper covered with a thin layer of silver, which are shown to have a high conductivity. As a proof‐of‐concept demonstration, a 3D metal scaffold structure with a size of ≈5 × 5 × 2 mm3 is printed. Glass‐channel molding assisted 3D printing of free‐standing metal microstructures is demonstrated using femtosecond laser internal processing and microfluidic electroless plating. Using this approach, 3D metal microstructures with widely tunable feature sizes (10–200 µm), flexible configurations, high conductivity, and high surface smoothness can be printed.

A simple method for producing freestanding 3D microstructures by integrated photomask micromolding

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabricating SU-8 Photoresist Microstructures with Controlled Convexity–Concavity and Curvature through Thermally Manipulating Capillary Action in Poly(dimethylsiloxane) Microholes

Maskless Fabrication of Small-Scale Structures Through Controlling Phase Interactions

Microfabrication of 3D-Polymeric Structures Using Soft Lithography for Tissue Engineering

Micro/nanofabrication of Brittle Hydrogels Using 3D Printed Soft Ultrafine Fiber Molds for Damage-Free Demolding.

A facile and low-cost micro fabrication material: flash foam

Fabrication of PDMS micro through-holes using micromolding in open capillaries

Solvent-Free Fabrication of Anisotropic Microparticles with Precise 3D Shape Control Using Dipping-Based Micromolding

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

Rapid Fabrication of A Microdevice with Concave Microwells and Its Application in Embryoid Body Formation

Concave Microlens Array Mold Fabrication in Photoresist Using UV Proximity Printing

Metal Microstructure Microfabrication Technique

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Glass‐Channel Molding Assisted 3D Printing of Metallic Microstructures Enabled by Femtosecond Laser Internal Processing and Microfluidic Electroless Plating

A Low-Cost Fabrication System for Manufacturing Soft-Lithography Microfluidic Master Molds

Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography

Microfluidic molding of photonic microparticles with engraved elastomeric membranes