Abstract:Stereolithography based 3D printing of microfluidics for prototyping has gained a lot of attention due to several advantages such as fast production, cost-effectiveness, and versatility over traditional photolithography-based microfabrication techniques. However, existing consumer focused SLA 3D printers struggle to fabricate functional microfluidic devices due to several challenges associated with micron-scale 3D printing. Here, we explore the origins and mechanism of the associated failure modes followed by presenting guidelines to overcome these challenges. The prescribed method works completely with existing consumer class inexpensive SLA printers without any modifications to reliably print PDMS cast microfluidic channels with channel sizes as low as ~75 μm and embedded channels with channel sizes as low ~200 μm. We developed a custom multi-resin formulation by incorporating Polyethylene glycol diacrylate (PEGDA) and Ethylene glycol polyether acrylate (EGPEA) as the monomer units to achieve micron sized printed features with tunable mechanical and optical properties. By incorporating multiple resins with different mechanical properties, we were able to achieve spatial control over the stiffness of the cured resin enabling us to incorporate both flexible and rigid components within a single 3D printed microfluidic chip. We demonstrate the utility of this technique by 3D printing an integrated pressure-actuated pneumatic valve (with flexible cured resin) in an otherwise rigid and clear microfluidic device that can be fabricated in a one-step process from a single CAD file. We also demonstrate the utility of this technique by integrating a fully functional finger-actuated microfluidic pump. The versatility and accessibility of the demonstrated fabrication method have the potential to reduce our reliance on expensive and time-consuming photolithographic techniques for microfluidic chip fabrication and thus drastically lowering our barrier to entry in microfluidics research.

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Fabrication of PDMS microfluidic devices with 3D wax jetting

Typography-Like 3D-Printed Templates for the Lithography-Free Fabrication of Microfluidic Chips.

A novel method for fabricating polydimethylsiloxane microfluidic chip master molds

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Fabrication of PDMS microfluidic devices using nanoclay-reinforced Pluronic F-127 as a sacrificial ink

Route to one-step microstructure mold fabrication for PDMS microfluidic chip

Fabrication of Various Cross-Sectional Shaped Polymer Microchannels by A Simple Pdms Mold Based Stamping Method

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Rapid Fabrication of Rounded Microchannels Via Extrusion Printing of Molds Using a Thixotropic Ink

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

A Simple Method For Fabrication Of Microstructures Using A Pdms Stamp

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

PDMS Microchannel Fabrication Technique Based on Microwire-Molding

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Fabrication of Topologically Complex Three-Dimensional Microfluidic Systems in PDMS by Rapid Prototyping

PDMS-based microfluidic device with multi-height structures fabricated by single-step photolithography using printed circuit board as masters.

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers