Abstract:Stereolithography based 3D printing of microfluidics for prototyping has gained a lot of attention due to several advantages such as fast production, cost-effectiveness, and versatility over traditional photolithography-based microfabrication techniques. However, existing consumer focused SLA 3D printers struggle to fabricate functional microfluidic devices due to several challenges associated with micron-scale 3D printing. Here, we explore the origins and mechanism of the associated failure modes followed by presenting guidelines to overcome these challenges. The prescribed method works completely with existing consumer class inexpensive SLA printers without any modifications to reliably print PDMS cast microfluidic channels with channel sizes as low as ~75 μm and embedded channels with channel sizes as low ~200 μm. We developed a custom multi-resin formulation by incorporating Polyethylene glycol diacrylate (PEGDA) and Ethylene glycol polyether acrylate (EGPEA) as the monomer units to achieve micron sized printed features with tunable mechanical and optical properties. By incorporating multiple resins with different mechanical properties, we were able to achieve spatial control over the stiffness of the cured resin enabling us to incorporate both flexible and rigid components within a single 3D printed microfluidic chip. We demonstrate the utility of this technique by 3D printing an integrated pressure-actuated pneumatic valve (with flexible cured resin) in an otherwise rigid and clear microfluidic device that can be fabricated in a one-step process from a single CAD file. We also demonstrate the utility of this technique by integrating a fully functional finger-actuated microfluidic pump. The versatility and accessibility of the demonstrated fabrication method have the potential to reduce our reliance on expensive and time-consuming photolithographic techniques for microfluidic chip fabrication and thus drastically lowering our barrier to entry in microfluidics research.

Research on Integrated 3D Printing of Microfluidic Chips

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

Integration of three-dimensional printing and microfluidics

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

3D Printing of Individualized Microfluidic Chips with DLP-Based Printer

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

A Method for Manufacturing Flexible Microfluidic Chip Based on Soluble Material

Typography-Like 3D-Printed Templates for the Lithography-Free Fabrication of Microfluidic Chips.

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Characterization and evaluation of 3D printed microfluidic chip for cell processing

Fabrication of Microfluidic Chips Based on an EHD-Assisted Direct Printing Method

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Fabrication of PDMS microfluidic devices using nanoclay-reinforced Pluronic F-127 as a sacrificial ink

Embedded 3D Printing of PDMS-Based Microfluidic Chips for Biomedical Applications

Novel Fabrication Technology Of Polydimethylsiloxane Microfluidic Chip

3D Printing Solutions for Microfluidic Chip-To-World Connections

Low-cost microfabrication methodology for microfluidic chips using 3D printer and replica molding techniques for biosensors

Research Progress of 3D Printing Microfluidic Chip

Recent Progress of 3D Printed Microfluidics Technologies