Abstract:Since the monumental work conducted by Whitesides et al. in 2007, research and development of paper-based microfluidics has been widely carried out, with its applications ranging from chemical and biological detection and analysis, to environmental monitoring and food-safety inspection. Paper-based microfluidics possesses several competitive advantages over other substrate materials, such as being simple, inexpensive, power-free for fluid transport, lightweight, biodegradable, biocompatible, good for colorimetric tests, flammable for easy disposal of used paper-based diagnostic devices by incineration, and being chemically modifiable. Myriad methods have been demonstrated to fabricate paper-based microfluidics, such as solid wax printing, cutting, photolithography, microembossing, etc. In this study, fabrication of paper-based microfluidics was demonstrated by spray on the printed paper. Different from the normally used filter papers, printing paper, which is much more accessible and cheaper, was utilized as the substrate material. The toner was intended to serve as the mask and the patterned hydrophobic barrier was formed after spray and heating. The processing parameters such as toner coverage on the printing paper, properties of the hydrophobic spray, surface properties of the paper, and curing temperature and time were systematically investigated. It was found that, after repetitive printing four times, the toner was able to prevent the hydrophobic spray (the mixture of PDMS and ethyl acetate) from wicking through the printing paper. The overall processing time for fabrication of paper-based microfluidic chips was less than 10 min and the technique is potentially scalable. Glucose detection was conducted using the microfluidic paper-based analytical devices (μPADs) as fabricated and a linear relationship was obtained between 1 and 10 mM.

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Integration of three-dimensional printing and microfluidics

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

3D Printed Paper-Based Microfluidic Analytical Devices

Printing 3D Microfluidic Chips with a 3D Sugar Printer

3D Printing of Individualized Microfluidic Chips with DLP-Based Printer

Fabrication of paper-based microfluidic analysis devices: a review

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Characterization and evaluation of 3D printed microfluidic chip for cell processing

Research on Integrated 3D Printing of Microfluidic Chips

Typography-Like 3D-Printed Templates for the Lithography-Free Fabrication of Microfluidic Chips.

3D Printing Solutions for Microfluidic Chip-To-World Connections

Rapid Fabrication by Digital Light Processing 3D Printing of a SlipChip with Movable Ports for Local Delivery to Ex Vivo Organ Cultures

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

The crossing and integration between microfluidic technology and 3D printing for organ-on-chips

Fabrication Techniques of Microfluidic Paper-Based Chips and Their Applications

Low-cost Rapid Prototyping and Assembly of an Open Microfluidic Device for a 3D Vascularized Organ-on-a-chip.

Benchtop Fabrication of Three-Dimensional Reconfigurable Microfluidic Devices from Paper-Polymer Composite

Using 3D printing to fabricate microfluidic chips for biosensing applications