Abstract:Embryonic stem cell (ESC)-derived aggregates, called embryoid bodies (EBs), are powerful in vitro models used to study human development and disease. However, the cost-effective and large-scale production of homogeneous EBs still remains a challenge. Here, we report a rapid, straightforward method for fabricating closely arrayed deep concave microwells, enabling the mass production of uniform EBs from single cell suspensions. By simply combining micromilling, caramel replica molding, and thermal reflow, we generate convex micromolds with high aspect ratios and excellent surface smoothness. Benefitting from the nature of reflow, this method can produce rounded bottom polydimethylsiloxane (PDMS) microwells, which are not easily achieved with standard soft lithography techniques but critical to producing spherical EBs. To achieve optimal concave microwells, we investigated the effect of thermal reflow temperature and time on the surface smoothness and roundness of the finished microwells. In addition, to further improve the utility of this method, we also investigated the effect of microwell aspect ratio (AR) on the loss of EBs during medium manipulation. The capability of this deep concave microwell system was validated by rapidly generating a large number of human embryonic stem cell (hESC)-derived EBs and then efficiently differentiating them into a cardiac lineage. The proposed fabrication method and deep concave microwell platform are highly practical, and thus will benefit the mass production of EBs for potential tissue regeneration and cell therapy applications. An extremely simple, feasible, and economical method for preparing high-quality and deep concave microwell arrays is presented for robustly producing homogeneous EBs on a large scale.

Rapid Fabrication of A Microdevice with Concave Microwells and Its Application in Embryoid Body Formation

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Standing Surface Acoustic Wave-Assisted Fabrication of Patterned Microstructures for Enhancing Cell Migration

Reflow-molded Deep Concave Microwell Arrays for Robust and Large-Scale Production of Embryoid Bodies.

A Simple Method For Fabrication Of Microstructures Using A Pdms Stamp

Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device

Concave Microwell Formation Induced by PDMS Water Vapor Permeability for Spheroid Generation

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

Route to one-step microstructure mold fabrication for PDMS microfluidic chip

Controllable Fabrication of Highly Ordered Spherical Microcavity Arrays by Replica Molding of In Situ Self-Emulsified Droplets

Advanced Micromachining of Concave Microwells for Long Term On-Chip Culture of Multicellular Tumor Spheroids

Fabrication Of Multilayered Tube-Shaped Microstructures Embedding Cells Inside Microfluidic Devices

Slip molding for precision fabrication of microparts.

Rapid Fabrication of Rounded Microchannels Via Extrusion Printing of Molds Using a Thixotropic Ink

Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

Optimization and Application of a Micro-Wire Molding Fabrication Method of Microfluidic Devices

Design and aligner-assisted fast fabrication of a microfluidic platform for quasi-3D cell studies on an elastic polymer

Fabrication and assembly of multi-layered microstructures embedding cells inside microfluidic devices

Low-cost Rapid Prototyping and Assembly of an Open Microfluidic Device for a 3D Vascularized Organ-on-a-chip.

Rapid Prototyping of Concave Microwells for the Formation of 3D Multicellular Cancer Aggregates for Drug Screening.

Direct Imprinting of Three-Dimensional Microfluidic Scaffolds