Abstract:The application of microfluidic devices as next-generation cell and tissue culture systems has increased impressively in the last decades. With that, a plethora of materials as well as fabrication methods for these devices have emerged. Here, we describe the rapid prototyping of microfluidic devices, using micromilling and vapour-assisted thermal bonding of polymethyl methacrylate (PMMA), to create a spheroid-on-a-chip culture system. Surface roughness of the micromilled structures was assessed using scanning electron microscopy (SEM) and atomic force microscopy (AFM), showing that the fabrication procedure can impact the surface quality of micromilled substrates with milling tracks that can be readily observed in micromilled channels. A roughness of approximately 153 nm was created. Chloroform vapour-assisted bonding was used for simultaneous surface smoothing and bonding. A 30-s treatment with chloroform-vapour was able to reduce the surface roughness and smooth it to approximately 39 nm roughness. Subsequent bonding of multilayer PMMA-based microfluidic chips created a durable assembly, as shown by tensile testing. MDA-MB-231 breast cancer cells were cultured as multicellular tumour spheroids in the device and their characteristics evaluated using immunofluorescence staining. Spheroids could be successfully maintained for at least three weeks. They consisted of a characteristic hypoxic core, along with expression of the quiescence marker, p27 kip1 . This core was surrounded by a ring of Ki67-positive, proliferative cells. Overall, the method described represents a versatile approach to generate microfluidic devices compatible with biological applications.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a fast, efficient method for fabricating microfluidic chips suitable for biological applications. Specifically, it uses polymethyl methacrylate (PMMA) material and combines micro - milling and chloroform vapor - assisted thermal bonding techniques to create a tumor organoid - on - a - chip system. The following are the specific problems that the paper attempts to solve: 1. **Improve the surface quality of microfluidic chips**: - Although micro - milling can rapidly fabricate microfluidic chips, it can lead to high surface roughness, which affects the performance of the chips and the effectiveness of biological applications. The paper significantly improves the surface quality of PMMA chips after micro - milling by introducing chloroform vapor treatment. - The changes in surface roughness were evaluated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results show that the surface roughness of the untreated micro - milled PMMA channels is approximately 153 nm, while after 30 seconds of chloroform vapor treatment, the roughness is reduced to approximately 39 nm. 2. **Achieve effective bonding of PMMA chips**: - The paper explores the effects of different bonding methods on PMMA chips and finds that traditional solvent - assisted bonding may cause structural damage or a decrease in optical transparency. In contrast, chloroform vapor - assisted bonding can achieve strong and non - destructive bonding at lower temperatures and pressures. - The experimental results show that the tensile strength of chloroform - vapor - bonded PMMA chips is 9.07 ± 0.9 MPa and 9.11 ± 0.5 MPa after one day and one month, respectively, which is significantly better than the method using ethanol solvent bonding. 3. **Construct a long - term stable tumor organoid culture system**: - The paper designs and fabricates a multi - layer PMMA microfluidic chip for the long - term culture of multi - cellular tumor organoids formed from breast cancer cells (MDA - MB - 231). - Research shows that this chip can maintain the survival and growth of organoids for at least three weeks, and the organoids exhibit a typical hypoxic core and quiescent zone, similar to the characteristics of the in - vivo tumor microenvironment. In summary, this paper aims to solve the problems of surface quality and bonding strength by improving the manufacturing process of microfluidic chips, especially for PMMA materials, thereby providing a more reliable and applicable tumor organoid - on - a - chip model for biomedical research.

Rapid prototyping of PMMA-based microfluidic spheroid-on-a-chip models using micromilling and vapour-assisted thermal bonding

Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Microplate micromilling: A customizable platform to support the prototyping, development and testing of microphysiological culture models

Fused Deposition Modeling of Microfluidic Chips in Polymethylmethacrylate

An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics

Route to one-step microstructure mold fabrication for PDMS microfluidic chip

A Rapid Prototyping Approach for Multi-Material, Reversibly Sealed Microfluidics

Tunable and Reversible Gelatin‐Based Bonding for Microfluidic Cell Culture

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Rapid Prototyping of Concave Microwells for the Formation of 3D Multicellular Cancer Aggregates for Drug Screening.

Microfabrication of chip-sized scaffolds for three-dimensional cell cultivation

PDMS Organ-On-Chip Design and Fabrication: Strategies for Improving Fluidic Integration and Chip Robustness of Rapidly Prototyped Microfluidic In Vitro Models

Injection molding and characterization of PMMA-based microfluidic devices

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Rapid Prototyping of Thermoplastic Microfluidic Devices

Uniformity of spheroid-on-chip by surface treatment of PDMS microfluidic platforms

Fabrication of poly(methyl methacrylate) microfluidic chips by redox-initiated polymerization.

Nano-liter perfusion microfluidic device made entirely by two-photon polymerization for dynamic cell culture with easy cell recovery

PDMS-free microfluidic cell culture with integrated gas supply through a porous membrane of anodized aluminum oxide