Abstract:Microfluidics, as an emerging technology, is highly dependent on the evolution of device materials and fabrication techniques. While replica molding of polydimethylsiloxane and hot embossing/injection molding of thermoplastics are most popular, they are either hard to scale up or inappropriate for laboratory-scale prototyping. Recently, photocurable resins, as a huge class of materials, have attracted extensive interest. However, very few of them can now be used in device fabrication due to the challenge in machining these materials. In response, we herein propose a novel concept of composite elastomers, which can covalently link with and consequently offer a flexible support to photocured thin films. This effect would allow most photocurable resins to be used in microfluidic device fabrication, greatly enriching the material choices for diverse applications. Moreover, the whole fabrication process becomes very simple and rapid, with an impressive throughput of at least hundreds of replicas per day. With these features, it is reasonably expected that the composite elastomer-enabled rapid photofabrication method will be very competent for laboratory prototyping, providing not only the ease of fabrication but also a possibility to select the materials specifically for ultimate applications and promising potential for volume production without the redevelopment process. These may offer a good opportunity to narrow the current gap between academic research and industrial practice.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06143.Movies showing the flexibility of the composite elastomer, process of composite elastomer-enabled photofabrication of the microfluidic device, generation of W/O/W double emulsion droplets, and operation of Quake valves (MP4, MP4, MP4, MP4)This article has not yet been cited by other publications.

Rapid Prototyping of Thermoplastic Microfluidic Devices

Rapid prototyping of thermoplastic microfluidic devices via SLA 3D printing

Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

Rapid Prototyping of Multilayer Thermoplastic Microfluidic Chip

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

A Rapid Prototyping Approach for Multi-Material, Reversibly Sealed Microfluidics

Rapid Prototyping Of Microfluidic Devices In Polymers

Scalable, Transparent and Micro: 3D Printed Rapid Tooling for Injection Moulded Microfluidics

Microfluidic Device Fabrication by Thermoplastic Hot-Embossing.

Green, Low-Cost, User-Friendly, and Elastomeric (GLUE) Microfluidics

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Rapid prototyping for high-pressure microfluidics

Rapid Micromolding of Sub-100 µm Microfluidic Channels Using an 8K Stereolithographic Resin 3D Printer

Rapid Prototyping of Single-Layer Microfluidic PDMS Devices with Abrupt Depth Variations under Non-Clean-room Conditions by Using Laser Ablation and UV-curable Polymer

Fabrication Protocol for Thermoplastic Microfluidic Devices: Nanoliter Volume Bioreactors for Cell Culturing

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices

3D printed metal molds for hot embossing plastic microfluidic devices

Microplate micromilling: A customizable platform to support the prototyping, development and testing of microphysiological culture models

Rapid Prototyping of Poly(methyl Methacrylate) Microfluidic Systems Using Solvent Imprinting and Bonding.

Rapid Fabrication of Rounded Microchannels Via Extrusion Printing of Molds Using a Thixotropic Ink