Abstract:This paper describes a procedure for making topologically complex three-dimensional microfluidic channel systems in poly(dimethylsiloxane) (PDMS). This procedure is called the "membrane sandwich" method to suggest the structure of the final system: a thin membrane having channel structures molded on each face (and with connections between the faces) sandwiched between two thicker, flat slabs that provide structural support. Two "masters" are fabricated by rapid prototyping using two-level photolithography and replica molding. They are aligned face to face, under pressure, with PDMS prepolymer between them. The PDMS is cured thermally. The masters have complementary alignment tracks, so registration is straightforward. The resulting, thin PDMS membrane can be transferred and sealed to another membrane or slab of PDMS by a sequence of steps in which the two masters are removed one at a time; these steps take place without distortion of the features. This method can fabricate a membrane containing a channel that crosses over and under itself, but does not intersect itself and, therefore, can be fabricated in the form of any knot. It follows that this method can generate topologically complex microfluidic systems; this capability is demonstrated by the fabrication of a "basketweave" structure. By filling the channels and removing the membrane, complex microstructures can be made. Stacking and sealing more than one membrane allows even more complicated geometries than are possible in one membrane. A square coiled channel that surrounds, but does not connect to, a straight channel illustrates this type of complexity.

Rapid prototyping of PDMS microdevices via <i></i>PLAT on nonplanar surfaces with flexible hollow-out mask

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Fabrication of PDMS micro through-holes using micromolding in open capillaries

Implementation of high‐performance, freestanding flexible film masks through photosensitive polyimide for arbitrary surface micropatterns creation

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Fast Digital Patterning of Surface Topography Toward Three-Dimensional Shape-Changing Structures

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Rapid Prototyping of Microfluidics Devices Using Novel Thermoset Polydicyclopentadiene

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Rapid fabrication of microdevices by controlling the PDMS curing conditions during replication of a laser-prototyped mould

Standing Surface Acoustic Wave-Assisted Fabrication of Region-Selective Microstructures Via User-Defined Waveguides.

Fabrication of Topologically Complex Three-Dimensional Microfluidic Systems in PDMS by Rapid Prototyping

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Facile Fabrication of Thin-Bottom Round-Well Plates Using the Deformation of PDMS Molds and Their Application for Single-Cell PCR

Rapid prototyping method for 3D PDMS microfluidic devices using a red femtosecond laser

Novel polydimethylsiloxane (PDMS) based microchannel fabrication method for lab-on-a-chip application

Route to one-step microstructure mold fabrication for PDMS microfluidic chip

Fabrication of PDMS microfluidic devices using nanoclay-reinforced Pluronic F-127 as a sacrificial ink

Rapid fabricating process of flexible PDMS- film with array micro round holes by blowing organic net framework

Rapid prototyping for high-pressure microfluidics