Abstract:The etch profile control for the amorphous carbon layer (ACL) is an important step in the 3D NAND fabrication process. Because ACL is the mask material for defining the pattern of the high-aspect-ratio-contact (HARC) dielectric ONON layer etch process, precise control of its etch profile is necessary. Specifically, an ideal ACL mask profile should be free of symptoms such as hole circularity distortion, profile twisting, bowing, and undercutting. In order to achieve this desired etch performance, knowledge of various etch contributing factors must be systematically derived and applied, including etch surface chemistry, high-aspect-ratio (HAR) etchant transport, ion flux and ion energy angle distribution function (EADF) control, etc. In this work, we investigate the ACL etch fundamental characteristics through combined 2D chamber-scale plasma simulations with the hybrid plasma-equipment model (HPEM) and 3D etch profile simulations with the Monte-Carlo Feature Profile Model (MCFPM) for an inductively-coupled-plasma (ICP) reactor with RF bias at the substrate. In particular, we focus on the profile trends under different reactant fluxes and energies. Our findings indicate that maintaining a neutral-starved (ion-rich) etch regime is essential for mitigating both the channel hole etch circularity distortion and the slit etch profile twisting. To achieve this desired etch regime, the HAR ion, and neutral transport must controlled by the RF bias power and frequency, substrate temperature, etc. Furthermore, especially in this neutral-limited etch regime which is necessary for distortion and twisting mitigation, the control of the consequent aspect-ratio dependent etching (ARDE), as well as maintaining the critical dimension (CD) and reducing bowing and undercutting are also necessary. For this purpose, atomistic density functional theory (DFT) calculations have been applied to compare the reaction energetics for various ALD-like sidewall passivation chemistries. Specifically, we propose a new process based on its favorable reaction energetics. Experimental cross-section images have matched simulation results. In conclusion, our insights have provided guidance for process optimization and tool design to meet industrial demands.

Etching and Smooth Processing of GaAs Surface Based on the Confined Etchant Layer Technique

Three-dimensional micromachining for microsystems by confined etchant layer technique

Chemical Etching Processes at the Dynamic GaAs/Electrolyte Interface in the Electrochemical Direct-Writing Micromachining

The coupling effect of slow-rate mechanical motion on the confined etching process in electrochemical mechanical micromachining

Micromachining process simulation using a continuous cellular automata method

Etch and growth rates of GaN for surface orientations in the crystallographic zone: Step flow and terrace erosion/filling via the Continuous Cellular Automaton

Stress-Etching Using Laser Electrochemical Micromachining with Masks

A Systematic Study on Dry Etching Process of Germanium for Ge 3D-Fets Applications

Large-area homogeneous corrosion process for electrochemical nanoimprint lithography on GaAs wafer by modulating contact pressure

Three-dimensional Microfabrication on GaAs Using a Regular Patterns Mold

High-aspect-ratio amorphous carbon mask etch profile control through plasma and surface chemistry optimization

Anisotropic Crystalline Etching Simulation Using a Continuous Cellular Automata Algorithm

Spatially-separated and photo-enhanced semiconductor corrosion processes for high-efficient and contamination-free electrochemical nanoimprint lithography

Research on Silicon Wafer Surface Phase under the Ultra-thin Slicing Process and Its Etching Hindrance Behavior during Metal-Assisted Chemical Etching

Toward Single-Atomic-Layer Lithography on Highly Oriented Pyrolytic Graphite Surfaces Using AFM-Based Electrochemical Etching

Nanoscale Ge Fin Etching Using Inductively Coupled Plasma For Ge-Based Multi-Gate Devices

Scanning Electrochemical Probe Lithography for Ultra-Precision Machining of Micro-Optical Elements with Freeform Curved Surface

Uniform Vertical Trench Etching on Silicon with High Aspect Ratio by Metal-Assisted Chemical Etching Using Nanoporous Catalysts.

Laser-induced photoelectrochemical lithography

A process study of electron beam nano-lithography and deep etching with an ICP system

Scanning Process of Micro-Spark Assisted Chemical Engraving (SACE) Based on Thin Laminar Flow Electrolytes and Given Narrow Machining Gaps