Abstract:Traditional methods for achieving hierarchical surface structures include highly specified, deterministic approaches to create features to meet design intention. In this study microstructural alteration was undertaken using laser apparatus and secondary texturing was achieved via succeeding electrochemical processes. Electrochemical jet machining (EJM) was performed on mild steel subjected to laser pre-treatment using power densities of 4167 and 5556W/cm2 with pulse durations from 0.3–1.5s. Results show that in combination, laser pre-treatment and EJM can alter the exposed surface textures and chemistries. Here, machined surface roughness (Sa) was shown to increase from approximately 0.45μm for untreated surfaces to approximately 18μm for surfaces subjected to extreme laser pre-treatments. After pre-treatments materials were characterised to appraise microstructural changes, shown to be martensite formation, reinforced by complementary simulation data, and significant increases in observable hardness from approximately 261HV for the as-received material to over 700HV after pre-treatment. The greater hardness was retained after EJM. Exposed martensitic lath structures at machined surfaces are shown to be partially responsible for surface roughness increases. The surfaces were explored with energy dispersive X-ray spectroscopy (EDS) and Raman spectroscopy demonstrating changes in apparent surface chemistry. This analysis revealed increasing oxide formation at the surface of the pre-treated EJM surface, a further contributory factor to surface roughness increases. This new process chain will be of interest to manufacturers seeking to control surface morphology for applications including micro-injection mould/die manufacture. While demonstrated here for steel similar mechanisms are exploitable in other material systems. A new technique has been demonstrated, resulting from the models and processes presented to couple laser and electrolyte jet processing for complex surface preparation.

Stress-Etching Using Laser Electrochemical Micromachining with Masks

Investigation on Laser Etch-Machining Underwater Based on Thermal-Mechanical Effect

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Study on the Effect of Electrolytes on Processing Efficiency and Accuracy of Titanium Alloy Utilizing Laser and Shaped Tube Electrochemical Machining

Investigation of laser marking technology with the image mask of liquid crystal display

Laser surface masking of stainless steel for electrochemical machining process

Theoretical and experimental study on hybrid laser and shaped tube electrochemical machining (Laser-STEM) process

Experiment Study of Laser Thermal Enhanced Electrochemical Deposition

A tool-based hybrid laser-electrochemical micromachining process: Experimental investigations and synergistic effects

Mechanism of Multi-Physical Fields Coupling in Macro-Area Processing via Laser–Electrochemical Hybrid Machining (LECM)

Thermodynamic Analysis and Experimental Study of Masked Corrosion Protection of 304 Stainless Steel Processed with Nanosecond Pulsed Laser

Hard Particle Mask Electrochemical Machining of Micro-Textures

Fabrication of Microgrooves by Synchronous Hybrid Laser and Shaped Tube Electrochemical Milling

Exploring Electrochemical Direct Writing Machining of Patterned Microstructures on Zr702 with Polyacrylamide Polymer Electrolyte

Micro/Nano Periodic Surface Structures and Performance of Stainless Steel Machined Using Femtosecond Lasers

Etching uniformity study of mask electrolyte jet machining based on mass transfer coefficient: 3D simulation and experimental validation

Effect of the mask geometry on the microstructure forming in through-mask electrochemical micromachining

Surface modification of mild steel using a combination of laser and electrochemical processes

Etching-assisted Femtosecond Laser Microfabrication

Chemical Etching Processes at the Dynamic GaAs/Electrolyte Interface in the Electrochemical Direct-Writing Micromachining

Machining of Metal Microcone Arrays Based on Through-Mask Electrochemical Micromachining with Circumferential Equivalent Etching