Abstract:An evanescently-coupled, hybrid InGaAsP-Si laser operating at 1.55 mu m is presented by selective area metal bonding (SAMB). The III-V laser, fabricated on a p-InP substrate with a semi-insulating InP: Fe buried heterostructure (BH), serves to provide optical gain. On the SOI wafer, a 3-mu m wide and 500-nm high Si waveguide is formed and the bonding metal (AuSn alloy) is selectively deposited in the regions 6 mu m away from the Si waveguide on each side. The InGaAsP gain structure is flip-chip bonded onto the patterned SOI wafer using SAMB method which separates laterally the optical coupling area and the metal bonding area to avoid strong light absorption by the bonding metal. The hybrid laser runs with a maximum single-sided output power of 9 mw at room temperature. The slope efficiency of the hybrid laser is about 0.04 W/A, 4 times that of the laser before bonding which indicates that the light confinement is improved after the bonding. The hybrid laser has achieved 10 degrees C contimuous wave (CW) lasing. A near-field image of the hybrid laser is studied. As the inject current increases, the light spot markedly shifts down to the Si waveguide and covers the Si waveguide region, which demonstrates that the light generated in the III-V active region is coupled into the Si waveguide. This method allows for different III-V devices to be bonded onto any desired places on a SOI substrate. The simplicity and flexibility of the fabrication process and high yield make the hybrid laser a promising light source.

A Hybrid Single-Mode Laser Based on Slotted Silicon Waveguides

1.9 μm hybrid silicon/iii-v semiconductor laser

Microlaser based on a hybrid structure of a semiconductor nanowire and a silica microdisk cavity.

Mode Selection in InGaAs/InGaAsP Quantum Well Photonic Crystal Lasers Based on Coupled Double-Heterostructure Cavities.

Hybrid integrated InGaAsP-Si laser using selective area metal bonding method for optical interconnection

Compact Silicon Photonic Hybrid Ring External Cavity (Shrec)/ingasb-Algaassb Wavelength-Tunable Laser Diode Operating from 1881-1947 Nm

InGaAsP/InP Based Q-modulated Slotted Fabry-Perot Laser Employing Lossy Half-Wave Trenches

Sub-kHz Linewidth, Hybrid III-V/silicon Wavelength-Tunable Laser Diode Operating at the Application-Rich 1647-1690 Nm

Single-mode and Wavelength Tunable Lasers Based on Deep-Submicron Slots Fabricated by Standard UV-lithography

Hybrid InGaAsP-Si Evanescent Laser by Selective-Area Metal-Bonding Method

Hybrid vertical-cavity laser with lateral emission into a silicon waveguide

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity

A Buried Ridge Stripe Structure InGaAsP-Si Hybrid Laser

1550-nm Evanescent Hybrid InGaAsP–Si Laser With Buried Ridge Stripe Structure

High Single-Mode Selectivity V-cavity Tunable Semiconductor Laser Based on GaAs

A Silicon Co-Integrated Light Source Module

Hybrid dual-gain tunable integrated InP-Si3N4 external cavity laser

Hybrid integrated Si3N4 external cavity laser with high power and narrow linewidth

Novel integration technique for silicon/III-V hybrid laser

Electrically Pumped Room-Temperature Pulsed InGaAsP-Si Hybrid Lasers Based on Metal Bonding

Scalable single-microring hybrid III-V/Si lasers for emerging narrow-linewidth applications