Abstract:An evanescently-coupled, hybrid InGaAsP-Si laser operating at 1.55 mu m is presented by selective area metal bonding (SAMB). The III-V laser, fabricated on a p-InP substrate with a semi-insulating InP: Fe buried heterostructure (BH), serves to provide optical gain. On the SOI wafer, a 3-mu m wide and 500-nm high Si waveguide is formed and the bonding metal (AuSn alloy) is selectively deposited in the regions 6 mu m away from the Si waveguide on each side. The InGaAsP gain structure is flip-chip bonded onto the patterned SOI wafer using SAMB method which separates laterally the optical coupling area and the metal bonding area to avoid strong light absorption by the bonding metal. The hybrid laser runs with a maximum single-sided output power of 9 mw at room temperature. The slope efficiency of the hybrid laser is about 0.04 W/A, 4 times that of the laser before bonding which indicates that the light confinement is improved after the bonding. The hybrid laser has achieved 10 degrees C contimuous wave (CW) lasing. A near-field image of the hybrid laser is studied. As the inject current increases, the light spot markedly shifts down to the Si waveguide and covers the Si waveguide region, which demonstrates that the light generated in the III-V active region is coupled into the Si waveguide. This method allows for different III-V devices to be bonded onto any desired places on a SOI substrate. The simplicity and flexibility of the fabrication process and high yield make the hybrid laser a promising light source.

Hybrid InGaAsP-Si Evanescent Laser by Selective-Area Metal-Bonding Method

Hybrid integrated InGaAsP-Si laser using selective area metal bonding method for optical interconnection

1.9 μm hybrid silicon/iii-v semiconductor laser

A Selective-Area Metal Bonding InGaAsP–Si Laser

Bonding Ingaasp/Ito/Si Hybrid Laser with Ito As Cathode and Light-Coupling Material

Electrically Pumped Room-Temperature Pulsed InGaAsP-Si Hybrid Lasers Based on Metal Bonding

A Selective Area Metal Bonding Method for Si Photonics Light Sources

A Hybrid Single-Mode Laser Based on Slotted Silicon Waveguides

III–V/Si Hybrid Laser Array with DBR on Si Waveguide*

1550-nm Evanescent Hybrid InGaAsP–Si Laser With Buried Ridge Stripe Structure

4–λ hybrid InGaAsP-Si evanescent laser array with low power consumption for on-chip optical interconnects

A selective area metal bonding method for electrically pumped silicon-based hybrid lasers

A Buried Ridge Stripe Structure InGaAsP-Si Hybrid Laser

Design of enlarged-asymmetric-power single-mode silicon evanescent lasers with asymmetric distributed feedback gratings

4-Λ InGaAsP-Si Distributed Feedback Evanescent Lasers with Varying Silicon Waveguide Width.

InAsP/InGaAsP quantum-well 1.3 [micro sign]m vertical-cavity surface-emitting lasers

Study of Waveguide Coupling Efficiency in Hybrid Silicon Lasers

Compact Silicon Photonic Hybrid Ring External Cavity (Shrec)/ingasb-Algaassb Wavelength-Tunable Laser Diode Operating from 1881-1947 Nm

IaAsP/InGaAsP quantum-well 1.3 μm vertical-cavity surface-emitting lasers

An Optically-Pumped Silicon Evanescent Microring Resonator Laser

Hybrid Structure Laser Based on Semiconductor Nanowires and a Silica Microfiber Knot Cavity