Abstract:Cu(In,Ga)Se-2 (CIGS) is a widely investigated material for thin film solar cells in the last decade. However, it has the concern of short availability of constituent elements (e.g. In, Ga) which limits its development. Research focused on new substitute of light absorber is eagerly needed. As an earth-abundant semiconductor, CZTS (Cu2ZnSnS4) has attracted considerable interest recently. CZTS has lots of similarities to CIGS, and is considered to be a promising material in the field of thin film solar cells owning to its fascinating optoelectronic properties, low-cost fabrication, and non-toxic nature. In this article, after introducing the features of CZTS material and the basic structure of CZTS thin film solar cells, different methods for the fabrication of CZTS thin films, as well as the corresponding device performance are discussed. CZTS thin film fabrication methods include vacuum based approaches and non-vacuum based approaches, with the former usually has the advantage of easy control of the chemical composition as well as good reproducibility; and the latter often has merits of low-cost, less-energy consumable, and suitable for large area deposition. Firstly, vacuum based approaches, including sputtering, evaporation and pulsed laser deposition, are discussed. Secondly, according to the different condition of the precursors, three subtypes of non-vacuum based approaches are presented (nanoparticle ink precursors, solution precursors, mixture precursors of solution and nanoparticle ink). Meanwhile, corresponding device efficiencies are summarized. Up to date, the power conversion efficiencies of 12.6% for CZTS based solar cells have been achieved, which is enormously encouraging. The new champion device was fabricated using a recently described hydrazine pure-solution approach, which significantly improves the coating uniformity and film structure. What's more, various film treatment strategies to optimize the CZTS thin film, such as selenization/sulfurization and elemental composition tuning (e.g. S/Se, Zn/Cu), are outlined here; the focus of future research and development are proposed.

Fabrication and Characterization of Cu2znsns4 Thin Films for Photovoltaic Application by Low-Cost Single Target Sputtering Process

Preparation And Characterization Of Cu2znsns4 Thin Films And Solar Cells Fabricated From Quaternary Cu-Zn-Sn-S Target

Cu2znsns4 Thin Film Solar Cell Utilizing Rapid Thermal Process of Precursors Sputtered from A Quaternary Target: A Promising Application in Industrial Processes

Investigation of Cu2ZnSnS4 Thin Films with Controllable Cu Composition and Its Influence on Photovoltaic Properties for Solar Cells

Cu2znsns4 Thin Film Solar Cells from Coated Nanocrystals Ink

Fabrication of Cu 2 ZnSnS 4 thin films using oxides nanoparticles ink for solar cell

An Alternative Route Towards Low-Cost Cu2ZnSnS4 Thin Film Solar Cells

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Influence of Sulfurization Pressure on Cu2ZnSnS4 Thin Films and Solar Cells Prepared by Sulfurization of Metallic Precursors

Synthesis and Characterization of Cu2ZnSnS4 Thin Films by the Sulfurization of Co-Electrodeposited Cu–Zn–Sn–S Precursor Layers for Solar Cell Applications

Fabrication of Cu2ZnSnS4 Thin Film Solar Cells by Sulfurization of Electrodeposited Stacked Binary Cu–Zn and Cu–Sn Alloy Layers

Cu 2 ZnSnS 4 thin film solar cell fabricated by magnetron sputtering and sulfurization

Growth and Characterization of Cu[sub 2]znsns[sub 4] Thin Films by DC Reactive Magnetron Sputtering for Photovoltaic Applications

Synthesis of Simple, Low Cost and Benign Sol-Gel Cu2InxZn1-xSnS4 Alloy Thin Films: Influence of Different Rapid Thermal Annealing Conditions and Their Photovoltaic Solar Cells

Effect of Sulfurization Process on the Properties of Solution-Processed Cu2SnS3 Thin Film Solar Cells

All-Layer Sputtering-Free Cu2Zn1-xCdxSnS4 Solar Cell with Efficiency Exceeding 7.5%

Progress in the Fabrication of Cu 2 ZnSnS 4 Thin Film for Solar Cells

Effect of Sulfurization Temperature on Properties of Cu2sns3 Thin Films and Solar Cells Prepared by Sulfurization of Stacked Metallic Precursors

Effect of Sulfurization Temperature of Solution-Processed Cu2SnS3 Absorber for Low Cost Photovoltaic Cells

Preparation of High-Quality Cu2ZnSnS4 Thin Films for Solar Cells Via the Improvement of Sulfur Partial Pressure Using a Static Annealing Sulfurization Approach

High-efficiency Ultra-Thin Cu 2 ZnSnS 4 Solar Cells by Double-Pressure Sputtering with Spark Plasma Sintered Quaternary Target