Abstract:Cu(In,Ga)Se-2 (CIGS) is a widely investigated material for thin film solar cells in the last decade. However, it has the concern of short availability of constituent elements (e.g. In, Ga) which limits its development. Research focused on new substitute of light absorber is eagerly needed. As an earth-abundant semiconductor, CZTS (Cu2ZnSnS4) has attracted considerable interest recently. CZTS has lots of similarities to CIGS, and is considered to be a promising material in the field of thin film solar cells owning to its fascinating optoelectronic properties, low-cost fabrication, and non-toxic nature. In this article, after introducing the features of CZTS material and the basic structure of CZTS thin film solar cells, different methods for the fabrication of CZTS thin films, as well as the corresponding device performance are discussed. CZTS thin film fabrication methods include vacuum based approaches and non-vacuum based approaches, with the former usually has the advantage of easy control of the chemical composition as well as good reproducibility; and the latter often has merits of low-cost, less-energy consumable, and suitable for large area deposition. Firstly, vacuum based approaches, including sputtering, evaporation and pulsed laser deposition, are discussed. Secondly, according to the different condition of the precursors, three subtypes of non-vacuum based approaches are presented (nanoparticle ink precursors, solution precursors, mixture precursors of solution and nanoparticle ink). Meanwhile, corresponding device efficiencies are summarized. Up to date, the power conversion efficiencies of 12.6% for CZTS based solar cells have been achieved, which is enormously encouraging. The new champion device was fabricated using a recently described hydrazine pure-solution approach, which significantly improves the coating uniformity and film structure. What's more, various film treatment strategies to optimize the CZTS thin film, such as selenization/sulfurization and elemental composition tuning (e.g. S/Se, Zn/Cu), are outlined here; the focus of future research and development are proposed.

Cu2znsns4 Thin Film Solar Cells from Coated Nanocrystals Ink

Optical and Electrical Properties of Uniform Non-Toxic Cu2ZnSnS4 Nanocrystal and Its Application in Solar Cells

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Cu2znsns4 Thin Film Solar Cell Fabricated by Co-Electrodeposited Metallic Precursor

An Alternative Route Towards Low-Cost Cu2ZnSnS4 Thin Film Solar Cells

Fabrication and Characterization of Cu2znsns4 Thin Films for Photovoltaic Application by Low-Cost Single Target Sputtering Process

Fabrication of Cu 2 ZnSnS 4 thin films using oxides nanoparticles ink for solar cell

Fabrication of Cu2ZnSnS4 Thin Films Based on Facile Nanocrystals-Printing Approach with Rapid Thermal Annealing (RTA) Process

Preparation of Cu2znsns4 Film by Printing Process for Low-Cost Solar Cell

Kesterite Cu2ZnSnS4 thin film solar cells by a facile DMF-based solution coating process

Facile synthesis of ultrafine Cu2ZnSnS4 nanocrystals by hydrothermal method for use in solar cells

Synthesis of Simple, Low Cost and Benign Sol-Gel Cu2InxZn1-xSnS4 Alloy Thin Films: Influence of Different Rapid Thermal Annealing Conditions and Their Photovoltaic Solar Cells

Wurtzite CZTS nanocrystals and phase evolution to kesterite thin film for solar energy harvesting

Synthesis and characterization of CZTS and Cu2-xAgxZnSnS4 thin films for the application of solar cells

Preparation And Characterization Of Cu2znsns4 Thin Films And Solar Cells Fabricated From Quaternary Cu-Zn-Sn-S Target

Progress in the Fabrication of Cu 2 ZnSnS 4 Thin Film for Solar Cells

Preparation of High-Quality Cu2ZnSnS4 Thin Films for Solar Cells Via the Improvement of Sulfur Partial Pressure Using a Static Annealing Sulfurization Approach

Fabrication of Cu2ZnSnS4 Thin Film Solar Cells by Annealing of Reactively Sputtered Precursors

Sol-gel synthesis of Cu2ZnSnS4 thin films under mild conditions

Synthesis and Characterization of Cu2ZnSnS4 Thin Films by the Sulfurization of Co-Electrodeposited Cu–Zn–Sn–S Precursor Layers for Solar Cell Applications

In situ fabrication of Cu2ZnSnS4 nanoflake thin films on both rigid and flexible substrates