Abstract:Cu(In,Ga)Se-2 (CIGS) is a widely investigated material for thin film solar cells in the last decade. However, it has the concern of short availability of constituent elements (e.g. In, Ga) which limits its development. Research focused on new substitute of light absorber is eagerly needed. As an earth-abundant semiconductor, CZTS (Cu2ZnSnS4) has attracted considerable interest recently. CZTS has lots of similarities to CIGS, and is considered to be a promising material in the field of thin film solar cells owning to its fascinating optoelectronic properties, low-cost fabrication, and non-toxic nature. In this article, after introducing the features of CZTS material and the basic structure of CZTS thin film solar cells, different methods for the fabrication of CZTS thin films, as well as the corresponding device performance are discussed. CZTS thin film fabrication methods include vacuum based approaches and non-vacuum based approaches, with the former usually has the advantage of easy control of the chemical composition as well as good reproducibility; and the latter often has merits of low-cost, less-energy consumable, and suitable for large area deposition. Firstly, vacuum based approaches, including sputtering, evaporation and pulsed laser deposition, are discussed. Secondly, according to the different condition of the precursors, three subtypes of non-vacuum based approaches are presented (nanoparticle ink precursors, solution precursors, mixture precursors of solution and nanoparticle ink). Meanwhile, corresponding device efficiencies are summarized. Up to date, the power conversion efficiencies of 12.6% for CZTS based solar cells have been achieved, which is enormously encouraging. The new champion device was fabricated using a recently described hydrazine pure-solution approach, which significantly improves the coating uniformity and film structure. What's more, various film treatment strategies to optimize the CZTS thin film, such as selenization/sulfurization and elemental composition tuning (e.g. S/Se, Zn/Cu), are outlined here; the focus of future research and development are proposed.

Fabrication of Cu 2 ZnSnS 4 thin films using oxides nanoparticles ink for solar cell

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Progress in the Fabrication of Cu 2 ZnSnS 4 Thin Film for Solar Cells

Preparation And Characterization Of Cu2znsns4 Thin Films And Solar Cells Fabricated From Quaternary Cu-Zn-Sn-S Target

Low Cost Preparation of Cu2ZnSnS4 and Cu2ZnSn(SxSe1−x)4 from Binary Sulfide Nanoparticles for Solar Cell Application

Chemical synthesis of Cu(In) metal inks to prepare CuInS2 thin films and solar cells

Fabrication and Characterization of Cu2znsns4 Thin Films for Photovoltaic Application by Low-Cost Single Target Sputtering Process

An Alternative Route Towards Low-Cost Cu2ZnSnS4 Thin Film Solar Cells

Fabrication of Cu2ZnSnS4solar Cells with 5.1% Efficiency Via Thermal Decomposition and Reaction Using a Non-Toxic Sol–gel Route

Study on the Optimization of Cu-Zn-Sn-O to Prepare Cu2ZnSnS4 Thin Film via a Nano Ink Coating Method

Cu2znsns4 Thin Film Solar Cells from Coated Nanocrystals Ink

One-step deposition of Cu2ZnSnS4 thin films for solar cells

Synthesis and Characterization of Cu2ZnSnS4 Thin Films by the Sulfurization of Co-Electrodeposited Cu–Zn–Sn–S Precursor Layers for Solar Cell Applications

In situ fabrication of Cu2ZnSnS4 nanoflake thin films on both rigid and flexible substrates

Fabrication of Cu2ZnSnS4 Thin Film Solar Cells by Sulfurization of Electrodeposited Stacked Binary Cu–Zn and Cu–Sn Alloy Layers

Cu 2 ZnSnS 4 thin film solar cell fabricated by magnetron sputtering and sulfurization

Kesterite Cu2ZnSnS4 Solar Cell from Sputtered Zn/(Cu & Sn) Metal Stack Precursors

Fabrication of Cu2ZnSnS4 Thin Films Based on Facile Nanocrystals-Printing Approach with Rapid Thermal Annealing (RTA) Process

Fabrication of solar cells based on $Cu_2ZnSnS_4$ prepared from $Cu_2SnS_3$ synthesized using a novel chemical procedure

Mechanism on the Modified Sulfurization Process for Growing Large-Grained Cu2ZnSnS4 Thin Films

Cu2znsns4 Thin Film Solar Cell Fabricated by Co-Electrodeposited Metallic Precursor