Abstract:Cu(In,Ga)Se-2 (CIGS) is a widely investigated material for thin film solar cells in the last decade. However, it has the concern of short availability of constituent elements (e.g. In, Ga) which limits its development. Research focused on new substitute of light absorber is eagerly needed. As an earth-abundant semiconductor, CZTS (Cu2ZnSnS4) has attracted considerable interest recently. CZTS has lots of similarities to CIGS, and is considered to be a promising material in the field of thin film solar cells owning to its fascinating optoelectronic properties, low-cost fabrication, and non-toxic nature. In this article, after introducing the features of CZTS material and the basic structure of CZTS thin film solar cells, different methods for the fabrication of CZTS thin films, as well as the corresponding device performance are discussed. CZTS thin film fabrication methods include vacuum based approaches and non-vacuum based approaches, with the former usually has the advantage of easy control of the chemical composition as well as good reproducibility; and the latter often has merits of low-cost, less-energy consumable, and suitable for large area deposition. Firstly, vacuum based approaches, including sputtering, evaporation and pulsed laser deposition, are discussed. Secondly, according to the different condition of the precursors, three subtypes of non-vacuum based approaches are presented (nanoparticle ink precursors, solution precursors, mixture precursors of solution and nanoparticle ink). Meanwhile, corresponding device efficiencies are summarized. Up to date, the power conversion efficiencies of 12.6% for CZTS based solar cells have been achieved, which is enormously encouraging. The new champion device was fabricated using a recently described hydrazine pure-solution approach, which significantly improves the coating uniformity and film structure. What's more, various film treatment strategies to optimize the CZTS thin film, such as selenization/sulfurization and elemental composition tuning (e.g. S/Se, Zn/Cu), are outlined here; the focus of future research and development are proposed.

An Alternative Route Towards Low-Cost Cu2ZnSnS4 Thin Film Solar Cells

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Cu2znsns4 Thin Film Solar Cells from Coated Nanocrystals Ink

Progress in the Fabrication of Cu 2 ZnSnS 4 Thin Film for Solar Cells

Fabrication of Cu2ZnSnS4 Thin Film Solar Cells by Sulfurization of Electrodeposited Stacked Binary Cu–Zn and Cu–Sn Alloy Layers

Sol-gel synthesis of Cu2ZnSnS4 thin films under mild conditions

Fabrication of Cu2ZnSnS4solar Cells with 5.1% Efficiency Via Thermal Decomposition and Reaction Using a Non-Toxic Sol–gel Route

Fabrication of Cu 2 ZnSnS 4 thin films using oxides nanoparticles ink for solar cell

Fabrication and Characterization of Cu2znsns4 Thin Films for Photovoltaic Application by Low-Cost Single Target Sputtering Process

Low Cost Preparation of Cu2ZnSnS4 and Cu2ZnSn(SxSe1−x)4 from Binary Sulfide Nanoparticles for Solar Cell Application

Synthesis and Characterization of Cu2ZnSnS4 Thin Films by the Sulfurization of Co-Electrodeposited Cu–Zn–Sn–S Precursor Layers for Solar Cell Applications

Preparation of Cu2ZnSnS4 Thin Films by Sulfurizing Stacked Precursor Thin Films Via Successive Ionic Layer Adsorption and Reaction Method

Kesterite Cu2ZnSnS4 thin film solar cells by a facile DMF-based solution coating process

Cu2znsns4 Thin Film Solar Cell Fabricated by Co-Electrodeposited Metallic Precursor

All-Layer Sputtering-Free Cu2Zn1-xCdxSnS4 Solar Cell with Efficiency Exceeding 7.5%

Solution-Processed One-Dimensional ZnO@CdS Heterojunction toward Efficient Cu2ZnSnS4 Solar Cell with Inverted Structure

Cu2ZnSnS4 solar cells prepared with sulphurized sol-gel deposited precursors

A Non-Vacuum Solution Route to Prepare Amorphous Metal Oxides Thin Films for Cu2znsn(S,Se)(4) Solar Cells

One-step deposition of Cu2ZnSnS4 thin films for solar cells

A 5.5% efficient co-electrodeposited ZnO/CdS/Cu 2 ZnSnS 4 /Mo thin film solar cell

Preparation of Cu2znsns4-Based Thin Film Solar Cells by A Combustion Method