Abstract:Cu(In,Ga)Se-2 (CIGS) is a widely investigated material for thin film solar cells in the last decade. However, it has the concern of short availability of constituent elements (e.g. In, Ga) which limits its development. Research focused on new substitute of light absorber is eagerly needed. As an earth-abundant semiconductor, CZTS (Cu2ZnSnS4) has attracted considerable interest recently. CZTS has lots of similarities to CIGS, and is considered to be a promising material in the field of thin film solar cells owning to its fascinating optoelectronic properties, low-cost fabrication, and non-toxic nature. In this article, after introducing the features of CZTS material and the basic structure of CZTS thin film solar cells, different methods for the fabrication of CZTS thin films, as well as the corresponding device performance are discussed. CZTS thin film fabrication methods include vacuum based approaches and non-vacuum based approaches, with the former usually has the advantage of easy control of the chemical composition as well as good reproducibility; and the latter often has merits of low-cost, less-energy consumable, and suitable for large area deposition. Firstly, vacuum based approaches, including sputtering, evaporation and pulsed laser deposition, are discussed. Secondly, according to the different condition of the precursors, three subtypes of non-vacuum based approaches are presented (nanoparticle ink precursors, solution precursors, mixture precursors of solution and nanoparticle ink). Meanwhile, corresponding device efficiencies are summarized. Up to date, the power conversion efficiencies of 12.6% for CZTS based solar cells have been achieved, which is enormously encouraging. The new champion device was fabricated using a recently described hydrazine pure-solution approach, which significantly improves the coating uniformity and film structure. What's more, various film treatment strategies to optimize the CZTS thin film, such as selenization/sulfurization and elemental composition tuning (e.g. S/Se, Zn/Cu), are outlined here; the focus of future research and development are proposed.

Investigation of Cu2ZnSnS4 Thin Films with Controllable Cu Composition and Its Influence on Photovoltaic Properties for Solar Cells

Low-cost Fabrication of Cu 2 ZnSnS 4 Thin Films for Solar Cell Absorber Layers

Preparation And Characterization Of Cu2znsns4 Thin Films And Solar Cells Fabricated From Quaternary Cu-Zn-Sn-S Target

Preparation and photovoltaic characterization of Cu2ZnSnS4 thin films fabricated by electrodeposition of alloy precursor followed by annealling

Growth of Cu2znsnse4 Film under Controllable Se Vapor Composition and Impact of Low Cu Content on Solar Cell Efficiency

Compositional Dependence of Photovoltaic Properties of Cu2ZnSnSe4 Thin Film Solar Cell: Experiment and Simulation

Synthesis of Simple, Low Cost and Benign Sol-Gel Cu2InxZn1-xSnS4 Alloy Thin Films: Influence of Different Rapid Thermal Annealing Conditions and Their Photovoltaic Solar Cells

Fabrication and Characterization of Cu2znsns4 Thin Films for Photovoltaic Application by Low-Cost Single Target Sputtering Process

Fabrication and Optoelectronic Property of Cu2 ZnSnS4 Film and Related Solar Cell

Progress in the Fabrication of Cu 2 ZnSnS 4 Thin Film for Solar Cells

Electrical and Optical Properties of Cu2ZnSnS4 Thin Films Prepared for Solar Cell Absorber

Characterization of Cu2ZnSnS4 Thin Films Prepared by Solution-based Deposition Techniques

Synthesis and characterization of CZTS and Cu2-xAgxZnSnS4 thin films for the application of solar cells

Characterization of a Cu2ZnSnS4solar Cell Fabricated by Sulfurization of Metallic Precursor Mo/Zn/Cu/Sn

Composition controlled preparation of Cu–Zn–Sn precursor films for Cu 2 ZnSnS 4 solar cells using pulsed electrodeposition

Investigation of Optimum Mg Doping Content and Annealing Parameters of Cu2MgxZn1−xSnS4 Thin Films for Solar Cells

Growth and Characterization of Cu[sub 2]znsns[sub 4] Thin Films by DC Reactive Magnetron Sputtering for Photovoltaic Applications

In-Depth Characterization of Secondary Phases in Cu 2 ZnSnS 4 Film and Its Application to Solar Cells.

Fabrication of Cu2ZnSnS4 Thin Film Solar Cells by Sulfurization of Electrodeposited Stacked Binary Cu–Zn and Cu–Sn Alloy Layers

High-efficiency Ultra-Thin Cu 2 ZnSnS 4 Solar Cells by Double-Pressure Sputtering with Spark Plasma Sintered Quaternary Target

A 5.5% efficient co-electrodeposited ZnO/CdS/Cu 2 ZnSnS 4 /Mo thin film solar cell