Abstract:In this paper, a balanced-to-balanced power divider is proposed, for the first time, with arbitrary power division, which can be regarded as the balanced form of a Gysel power divider. The constraint rules are provided for its mixed-mode and single-ended S-parameters. The six-port network is analyzed by simplifying it to two-port networks with other ports matched at the central frequency. Its critical characteristic impedances are then calculated analytically by our derived equations according to the desired differential-mode power division ratio. The maximum achievable power division ratio is 1:4.69 2 when the characteristic impedances are limited within the realizable range of 20-120 Ω. The impacts of several freely selected design parameters on the operating bandwidth are explored numerically. A prototype is realized by microstrip lines and lumped resistors with the power division ratio of 1:3 2 . The balanced-to-balanced performances of unequal power division, low differential-mode insertion loss, good suppression of common-mode noises, and mode conventions have been demonstrated by the simulated and measured results of the balanced-to-balanced power divider prototype.

An Absorptive Balanced-to-Balanced Power Divider

A New Balanced-to-Balanced Power Divider/Combiner

A Balanced-to-Balanced Power Divider with Arbitrary Power Division

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

An approach to 1-to-3 way microstrip balanced-to-balanced power divider/combiner

A new balanced-to-single-ended (BTSE) power divider

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

A Wideband Balanced-to-Unbalanced Out-of-Phase Power Divider Based on Hybrid Microstrip/Slotline Structure

Multilayer Balanced-to-Unbalanced Power Divider with Wideband Transmission Characteristic and Common-Mode Suppression

A Single-Ended-to-Balanced Impedance-Transforming Branch-Line Coupler With Arbitrary Power Division Ratio

A Dual-Band Unequal Power Divider with Flexible Choice of Implementation

A Balanced-To-Balanced Filtering Gysel Power Divider with Unequal Power Division

Wideband Single-Ended-to-Balanced Power Divider with Intrinsic Common-Mode Suppression

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A Balanced-to-Unbalanced Hybrid Ring with Arbitrary Power Division Ratio

A New Compact Power Divider Based on Capacitor Central Loaded Coupled Microstrip Line

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

A Dual-Band Wilkinson Power Divider Using Dual Coupled Lines and Open Stubs

Balanced-to-Balanced Gysel Filtering Power Divider with Arbitrary Power Division

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth