Abstract:This study presents a novel structural design of a bi-axial piezoelectric micro-electro-mechanical-systems scanning mirror aimed at preventing the dynamic coupling between the two scanning axes and avoiding distortion of the scanning pattern. In the proposed design, the gimbal actuator, constrained by torsional springs at both ends, not only serves as the torque generation component for the actuation of one axis but also acts as a pivot to prevent structural interference between the two axes during scanning. This approach achieves the advantages of decoupling and compactness simultaneously. Simulations indicate that the gimbal actuator experiences very small displacement during y-axis actuation, thus realizing the dynamic decoupling from the x-axis scanning unit. To evaluate the proposed designs, fabrication processes were adopted on a silicon-on-insulator wafer with a lead zirconium titanate film. The miniaturized scanners, featuring a mirror with a 1.2 mm diameter, were realized on a compact 5 × 5 mm 2 chip. Measurements indicate that the resonant frequencies of x-axis and y-axis scanning are 2.69 kHz and 4.29 kHz, respectively, and the optical scanning angles reach 33° and 21° under an 8 V pp driving voltage. Additionally, measurements show that the displacement ratio between the central mirror and the gimbal actuator can reach up to 17 during y-axis actuation, verifying the concept of dynamic decoupling. The bi-axial Lissajous scanning pattern with straight edges also demonstrates the effective decoupling by the proposed gimbal actuator design.

An Improved Design Method of the MEMS-Based Folded-Beam Micromirror

Design of the MEMS-Based Straight-Beam Micromirror Using a Genetic Algorithm

Research of an Adaptive Micro-Mirror Based on Micro-Opto-Electro-Mechanical- System

Comparisons of the Straight Torsion Beam and Folded Torsion Beam Designs for MEMS Micromirrors

Machining and functional testing of adaptive micro-mirror array

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

Modeling and Optimization of a Novel ScAlN-Based MEMS Scanning Mirror with Large Static and Dynamic Two-Axis Tilting Angles

Reduced-Order Modelling of the Bending of an Array of Torsional Micromirrors

Optical-Electromechanical Performance of Mems Tilting Micro-Mirrors for Aon Communication System

Progress of Si-based MEMS Torsion Micromirror

Design of a Tunable Resonant Micromirror

Design of bi-axial piezoelectric MEMS micro mirror with gimbal actuator for dynamic decoupling

Research on integrated design method of high-precision space-based active optical large-caliber splicing mirror drive and support

Study on layout of double rotated serpentine springs for vertical-comb-driven torsional micromirror

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

Design and Fabrication of an Additively Manufactured Aluminum Mirror with Compound Surfaces

Theoretical modeling and experimental investigation of in-phase resonant MEMS mirrors with cascaded structures

Modeling and Simulation of Two-Dimensional MOEMS Scanning Mirror