Abstract:We have developed a manufacturing process for micromirrors based on microelectromechanical systems (MEMS) technology. The process involves designing an electrostatic vertically comb-driven actuator and utilizing a self-alignment process to produce a height difference between the movable comb structure and the fixed comb structure of the micromirror. To improve the stability of the micromirror, we propose four instability models in micromirror operation with the quasi-static driving principle and structure of the micromirror considered, which can provide a basic guarantee for the performance of vertical comb actuators. This analysis pinpoints factors leading to instability, including the left and right gap of the movable comb, the torsion beams of the micromirror, and the comb-to-beams distance. Ultimately, the voltages at which device failure occurs can be determined. We successfully fabricated a one-dimensional micromirror featuring a 0.8 mm mirror diameter and a 30 μm device layer thickness. The height difference between the movable and fixed comb structures was 10 μm. The micromirror was able to achieve a static mechanical angle of 2.25° with 60 V@DC. Stable operation was observed at voltages below 60 V, in close agreement with the theoretical calculations and simulations. At the driving voltage of 80 V, we observed the longitudinal displacement movement of the comb fingers. Furthermore, at a voltage of 129 V, comb adhesion occurred, resulting in device failure. This failure voltage corresponds to the lateral torsional failure voltage.

Study on layout of double rotated serpentine springs for vertical-comb-driven torsional micromirror

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

An Overview of Radial Supporting Ways for Large-Size Movement Mirror: a Case Study of a Large-Aperture Rotating Prism

Driving Principle and Stability Analysis of Vertical Comb-Drive Actuator for Scanning Micromirrors

Theoretical modeling and experimental investigation of in-phase resonant MEMS mirrors with cascaded structures

Novel Bow-Shape Transmission Springs for Piezoelectric MEMS Mirror with 180-Degrees Optical Scanning Angle

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

Micro Torsion Mirror Actuated by Compound Electrostatic Driving Structure

An Improved Design Method of the MEMS-Based Folded-Beam Micromirror

Into-plane Rotating Micromirror Actuated by a Hybrid Electrostatic Driving Structure

Realization of Three-Dimensionally MEMS Stacked Comb Structures for Microactuators Using Low-Temperature Multi-Wafer Bonding with Self-Alignment Techniques in CMOS-Compatible Processes

Progress of Si-based MEMS Torsion Micromirror

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

Comparisons of the Straight Torsion Beam and Folded Torsion Beam Designs for MEMS Micromirrors

Electromechanical Studies On Micro Torsion-Mirror Actuators With Monolithically Integrated Fiber Self-Holding Structures

A Novel Type Of Vertical Torsion Micro-Mirror With Combs

Statics Modeling and Analyzing of Three-Degree-of-Freedom Spherical Ultrasonic Motors with the Spiral Spring

Design of a Tunable Resonant Micromirror

Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application

Theoretical and finite element analysis of dynamic deformation in resonating micromirrors