Abstract:The Al–Al2O3–MgO composites with added aluminum contents of approximately 0wt%, 5wt%, and 10wt%, named as M1, M2, and M3, respectively, were prepared at 1700°C for 5 h under a flowing N2 atmosphere using the reaction sintering method. After sintering, the Al–Al2O3–MgO composites were characterized and analyzed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The results show that specimen M1 was composed of MgO and MgAl2O4. Compared with specimen M1, specimens M2 and M3 possessed MgAlON, and its production increased with increasing aluminum addition. Under an N2 atmosphere, MgO, Al2O3, and Al in the matrix of specimens M2 and M3 reacted to form MgAlON and AlN-polytypoids, which combined the particles and the matrix together and imparted the Al–Al2O3–MgO composites with a dense structure. The mechanism of MgAlON synthesis is described as follows. Under an N2 atmosphere, the partial pressure of oxygen is quite low; thus, when the Al–Al2O3–MgO composites were soaked at 580°C for an extended period, aluminum metal was transformed into AlN. With increasing temperature, Al2O3 diffused into AlN crystal lattices and formed AlN-polytypoids; however, MgO reacted with Al2O3 to form MgAl2O4. When the temperature was greater than (1640 ± 10)°C, AlN diffused into Al2O3 and formed spinel-structured AlON. In situ MgAlON was acquired through a solid-solution reaction between AlON and MgAl2O4 at high temperatures because of their similar spinel structures.

Synthesis of Mgal2o4-Sialon Composite Powders by Carbothermal Nitritdation of Forsterite and Alumina

Phase transformation of MgAl2O4 -SiAlON composites synthesized by carbonthermal reduction and nitridation method from magnesite and bauxite

Synthesis of Fe-Sialon Composites Using High Alumina Coal Gangue by Carbothermal Nitridation

Preparation of NiAl2O4/Al2O3 composite nanopowder

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Synthesis of Sialon-Mullite Composites Using Fly Ash by Carbon-Thermal Reduction Nitridation

Synthesis of Sialon Powders from Aluminium Dross and Fly Ashes

Synthesis of magnesium aluminate spinel by reaction sintering with different magnesia sources

Study on Synthesis of CA6 and MgAl2O4 with Dolomite As a Source of Calcium and Magnesium

Synthesis of MgAlON/β-SiAlON Composites by Carbonthermal Reduction-nitridation

Phase transformation of high aluminium fly ash in carbothermal reduction–nitridation at high temperatures

Effect of Alumina Contents on the Synthesis of ZrN-Sialon from Zircon

In situ reaction mechanism of MgAlON in Al–Al2O3–MgO composites at 1700°C under flowing N2

Synthesis of ZrN-sialon composites from zircon and alumina by carbothermal reduction-nitridation

Synthesis of Sialon-Ti(N,C) Composites Via Carbothermal Reduction-Nitridation from Pyrophyllite and Rutile

Sintering and Composition of a Powder Mixture of Fine Al2O3 and Beta-Sialon Composite Made from Bauxite

Effects of in situ Mg-Sialon and β-Sialon on the microstructure and properties of MgAl2O4-SiC composites

Synthesis of Rod-Like Α-Sialon by Carbothermal Reduction-Nitridation

Phases transformation of high-alumina fly ash under carbothermal reduction and nitridation

Study on Synthesizing Diphase Sialon from Lower Al2O3 Bauxite by Carbothermal Reduction-Nitridation

Effects of carbon coke additions on synthesis of ZrN-SiAlON from zircon and alumina by carbothermal reduction nitridation process