Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

M5B3 Boride at the Grain Boundary of a Nickel-based Superalloy

Precipitation and Evolution of Grain Boundary Boride in A Nickel-Based Superalloy During Thermal Exposure

Boride-induced Dislocation Channeling in a Single Crystal Ni-based Superalloy

Molecular Dynamics Study of Grain-Boundary-Induced Melting in B2nial Using A Many-Body Potential

Precipitation and growth behavior of γ′ phase in Ni3Al-based superalloy under thermal exposure

On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys

MC decomposition and boride formation in a next generation polycrystalline Ni based superalloy during isothermal exposure at 900 °C

The Distribution and Morphology of Trace Mg at A Grain-Boundary in A Ni-Base Superalloy

Microstructural Analysis on Grain Boundary of Boron– and Zirconium–Containing Wrought Nickel-Based Superalloys

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Computational approach to grain boundary segregation engineering of nickel-base superalloys

Investigation on the grain boundary strengthening effect of a nickel‐based superalloy

Grain boundary precipitation behavior in Re-containing nickel-based directionally solidified superalloys with carbon and boron additions

Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering

Phase Field Simulation of Alloying Element Segregation During Solidification of DD5 Nickel-Base Single Crystal Superalloy

Effects of the Primary Carbide Distribution on the Evolution of the Grain Boundary Character Distribution in a Nickel-Based Alloy

Microstructure and Elevated Temperature Tensile Behaviour of Directionally Solidified Nickel Based Superalloy

Effects of B content on microstructure and high-temperature stress rupture properties of a high chromium polycrystalline nickel-based superalloy

On the effect of boron on grain boundary character in a new polycrystalline superalloy

Solid-State Phase Transformations Involving (Nb,Mo)2CrB2 Borides and (Nb,Ti)2CS Carbosulfides at the Grain Boundaries of Superalloy Inconel 718