Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

Investigation on the grain boundary strengthening effect of a nickel‐based superalloy

In-situ Study of the Effect of Grain Boundary Misorientation on Plastic Deformation of Inconel 718 at High Temperature

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

The effect of grain boundary structures on crack nucleation in nickel nanolaminated structure: A molecular dynamics study

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Effect of Orientation on the Microstructure of Nickel‐based Crystalline Superalloys

Effect of orientations on in situ tensile deformation and fracture behaviours of nickel-base single-crystal superalloys

Orientation and temperature dependence of yielding and deformation behavior of a nickel-base single crystal superalloy

Effects of Secondary Orientation on Crack Closure Behavior of Nickel-Based Single Crystal Superalloys

Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering

Computational approach to grain boundary segregation engineering of nickel-base superalloys

Effects of Crystal Orientation and External Stress on the Static Recrystallization Behavior of an Ni-Based Single-Crystal Superalloy

Effect of misorientation on the fatigue life of nickel-base single crystal superalloy DD5 at 980 °C

Crystal Orientation Effect on Fretting Fatigue Induced Geometrically Necessary Dislocation Distribution in Ni-based Single-Crystal Superalloys

Effects of secondary orientation on fatigue crack initiation in a single crystal superalloy

Investigation of Grain Competitive Growth During Directional Solidification of Single-Crystal Nickel-Based Superalloys

Influence of crystal orientation on cellular growth of a nickel-base single crystal superalloy

Effects of crack-γ/γ' interface relative distributions on the deformation and crack growth behaviors of a nickel-based superalloy

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Effects Of Minor Hf On High Temperature Stress Rupture Properties Of High Angle Grain Boundary In A Re-Containing Ni-Based Bicrystal Superalloy

Influence of orientation and temperature on the fatigue crack growth of a nickel-based directionally solidified superalloy