Abstract:While boron is added to many structural alloys primarily as a grain-boundary strengthener, it has myriad other implications on the microstructure and thermophysical properties of these alloys. In the present study, we report these effects by varying boron addition in the range of 0.02 at.% to 0.8 at.% on the microstructure, thermo-physical properties and the creep resistance of tungsten free, γ/γ′ base Co–30Ni–10Al–5Mo–2Ta–2Ti (at.%) polycrystalline superalloy. Without boron addition, the plastic strain during creep at 850 °C is primarily accommodated through grain-boundary decohesion, often enhanced by severe oxygen attack along the grain boundaries. The addition of boron alleviates the poor grain-boundary cohesivity while inhibiting internal oxidation. An increase in the solvus temperature with boron addition was found, leading to an increase in the high-temperature capability of this alloy (∼40 °C). However, a concurrent decrease in the alloy's melting point has been observed. Coupled with improved grain-boundary cohesivity and larger grain size, improvement in creep resistance by almost an order of magnitude could be achieved. While at low amounts of boron (0.02–0.08 at.%) borides do not form, indicating solid solubility of boron within the bulk alloy, at high boron contents (0.2–0.8 at.%), Co and Mo rich boride forms primarily along the grain boundaries. These borides are surrounded by a distribution of fine secondary γ′ precipitates around them. In contrast, borides in Co–Al–W alloys promote precipitate free zones (PDZ), causing deterioration of mechanical properties. The beneficial effect of boron along grain-boundaries, both in elemental form and in the form of borides, has been highlighted in the present study which paves way for optimizing boron addition in other alloys of this class.

Boride-induced Dislocation Channeling in a Single Crystal Ni-based Superalloy

New Insights of the Microcrack Initiation Induced by Mo Addition in Ni-based Single Crystal Superalloys During Creep at 900 °C

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Shearing Mechanisms of Stacking Fault and Anti-Phase-boundary Forming Dislocation Pairs in the Γ′ Phase in Ni-based Single Crystal Superalloy

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

M5B3 Boride at the Grain Boundary of a Nickel-based Superalloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Microstructural Analysis on Grain Boundary of Boron– and Zirconium–Containing Wrought Nickel-Based Superalloys

On the Relationship Between Dislocation Creep Strength and Microstructure of a Solid-Solution-Strengthened Ni-Base Superalloy

Microstructure Evolution and Dislocation Mechanism of a Third-Generation Single-Crystal Ni-Based Superalloy during Creep at 1170 °C

On the coarsening mechanism and deformation of borides under annealing and creep in a polycrystalline superalloy

Formative and controlled mechanisms of nano-sized γ′ precipitates with local phase-transition within dislocation networks of nickel-based single crystal superalloys

Oxidation-induced recrystallization and damage mechanism of a Ni-based single-crystal superalloy during creep

Precipitation and Evolution of Grain Boundary Boride in A Nickel-Based Superalloy During Thermal Exposure

Evolution and Structure Characterization of the Carbide and Boride during Creep in A Ni-based Superalloy

Molecular Dynamics Study of Mosaic Structure in the Ni-based Single-Crystal Superalloy

Influence of interfacial dislocation network on strain-rate sensitivity in Ni-based single crystal superalloys

High-Temperature Creep Behavior of a Nickel-Based Single-Crystal Superalloy with Small-Angle Deviation from [111] Orientation

The Determination of Degree of Order of Nearby Grain Boundary in the Ni3A1 Family

Investigation on the grain boundary strengthening effect of a nickel‐based superalloy