Abstract:The mechanical properties of nickel-based single crystal superalloys deteriorate with increasing misorientation, thus the finished product rate of the casting of single crystal turbine airfoils may be reduced due to the formation of grain boundaries especially when the misorientation angle exceeds to some extent. To this day, evolution of the microstructures at the grain boundaries with misorientation and the relationship between the microstructures and the mechanical properties are still unclear. In this work a detailed characterization of the misorientation related microstructure at the grain boundary in DD6 single crystal superalloy has been carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques; the elemental distribution at the grain boundaries has been analyzed by energy dispersive (EDS) X-ray mapping; and the effect of precipitation of μ phases at the grain boundary on the mechanical property has been evaluated by finite element calculation. It is shown that the proportion of γ phase at the grain boundaries decreases, while the proportion of γ′ phase at the grain boundaries increases with increasing misorientation; the μ phase is precipitated at the grain boundaries when the misorientation angle exceeds about 10° and thus it could lead to a dramatic deterioration of the mechanical properties, as well as that the enrichment of Re and W gradually disappears as the misorientation angle increases. All these factors may result in the degradation of the mechanical properties at the grain boundaries as the misorientation increases. Furthermore, the finite element calculation confirms that precipitation of μ phases at the grain boundary is responsible for the significant deterioration of the mechanical properties when the misorientation exceeds about 10°. This work provides a physical imaging of the microstructure for understanding the relationship between the mechanical properties and the misorientation of the grain boundaries in the single crystal superalloy. Based on our study we hope that we can offer some scientific basis for further improvement of the nickel-based single crystal superalloys.

Phase Field Simulation of Alloying Element Segregation During Solidification of DD5 Nickel-Base Single Crystal Superalloy

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

Segregation Behavior of Alloying Elements in Different Oriented Single Crystal Nickel Based Superalloys

Phase-field Simulation of Isothermal Solidification of Ternary Alloy Based on KKS Model

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Microstructural Evolution and Compositional Homogenization of a Low Re-bearing Ni-based Single Crystal Superalloy During Through Progression of Heat Treatment

Misorientation Related Microstructure at the Grain Boundary in A Nickel-Based Single Crystal Superalloy

Multiphase-field Simulation of the Solution Heat Treatment Process in a Ni-based Superalloy

Microstructures and homogenization behavior of a nickel-based superalloy used for 850¬Ý‚ÑÉ turbine disc prepared by electron beam smelting layered solidification

Microstructural Instability and Precipitation Behaviors of Intermetallic Phases in a Nb-Containing CoNi-Based Superalloy

Experimental Study on the Micro-Mechanical Parameters of Ni-based Single-Crystal Superalloys Using Nanoindentation and Element Distribution Analysis

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Thermodynamic Simulation Calculation on Precipitation Behavior of Equilibrium Phases in a Low Re bearing Nickel based Single Crystal Superalloy

Microscopic phase-field study on L12 interface properties of Ni75Al18Cr7 superalloy

Precipitation and growth behavior of γ′ phase in Ni3Al-based superalloy under thermal exposure

Microstructural evolution and elemental interdiffusion behaviour near the interface of NiAlTa alloy and single crystal superalloy DD5 at 1000 °C, 1050 °C, and 1100 °C

Solidification Behavior of Ni-based Superalloy at Different Cooling Rates