Abstract:Polycrystalline Ni3Al-based superalloy with up to 70% <math>γ′</math> phase owns excellent strength at around 1100 °C. It has been successfully used as a substitute for turbine blade crown, which is one of the aircraft components working in the severest environment (i.e., sometimes nearly overheating). However, few studies concentrate on the coarsening resistance and phase thermal stability in this newly designed polycrystalline superalloy at the working temperature, hence, directional coarsening behavior of primary <math>γ′</math> <math>(γI′)</math> has remained restricted. This paper investigated directional coarsening behavior of <math>γI′</math> during aging treatment (1100 °C) after overheating at 1270 °C with furnace cooling (SFA), air cooling (SAA) and water cooling (SWA) respectively. It clearly showed that <math>γI′</math> grew into lamellar and gradually became irregular during the directional coarsening process. Moreover, its morphological combination mode was illustrated. Since parallel short lamellar <math>γI′</math> connected each other, long lamellar formed. When perpendicular long lamellar <math>γI′</math> connected each other, it became L-type or T-type, i.e., precursor of irregular <math>γI′</math>. The kinetics of directional coarsening regime of <math>γI′</math> was in line with the matrix-diffusion-controlled (MDC) theory according to the evaluation of <math>γI′</math> size. This was caused by higher migration of <math>γI′</math> interfaces than the diffusion of solute elements. It was also confirmed that driving force of directional coarsening mainly depended on the competition of elemental diffusion, lattice misfit distribution and <math>γ</math> channel distance.

Precipitation and growth behavior of γ′ phase in Ni3Al-based superalloy under thermal exposure

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

Influences of the Γ′ Phase on the Mechanical Properties of a Nickel-Based Single Crystal Superalloy

Microstructure Evolution of Primary Γ′ Phase in Ni3Al-Based Superalloy

Microstructural Evolution and Phase Transformation of Ni3Al-based Superalloys after Thermal Exposure

Phase-Field Study on Competition Precipitation Process of Ni-Al-V Alloy

Microstructure Characterization of Ni-Based Superalloys During Thermal Exposure

Microstructural Characterization and Phase Separation Sequences During Solidification of Ni3Al-Based Superalloy

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

In Situ Small-Angle Neutron Scattering Study of Precipitation and Evolution Behavior of Secondary Phases in Ni-Based Superalloys

Precipitation and Growth Behavior of Mushroom-Like Ni3Al

Microstructure evolution behavior of Ni3Al (γ′) phase in eutectic γ-γ′ of Ni3Al-based alloy

Precipitation kinetics of ordered γ′ phase and microstructure evolution in a NiAl alloy

Growth behavior of γ′ phase in a powder metallurgy nickel-based superalloy under interrupted cooling process

Effect of Μ Precipitation and Γ′ Evolution on Intra/intergranular Strength of Ni-Co-Cr-based Superalloys after 800 ℃ Thermal Exposure

Short Study on Mechanism of Morphology Change of γ′ Precipitates in IN718 Plus

Directional coarsening behavior of primary γ′ phase in Ni3Al-based superalloy during aging heat treatment

Precipitation Characteristics Of A Nickel-Based Single-Crystal Superalloy After Long-Term Thermal Exposure

P Phase Precipitation and Strengthening Behavior of a Novel Polycrystalline Ni3Al-based Intermetallic Alloy at 1100 °C

P phase precipitation and strengthening behavior of a novel polycrystalline Ni 3 Al-based intermetallic alloy at 1100 °C

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure