A New Method of Angle Measurement Based on Internal Reflection Effect

peisen s huang,satoshi kiyono,osamu kamada

DOI: https://doi.org/10.1007/978-3-642-84494-2_49

1991-01-01

Abstract:It is well known that a light beam impinging on an air-glass interface internally, undergoes a rapid reflectance change if the beam lies in the vicinity of the critical angle. Using this characteristic, the angle displacement of the incident beam δθ can be readily measured by detecting the corresponding reflectance R(δθ). In this research, however, we relate δθ to the so called linearized reflectance R(δθ) = {R{δθ) − R(−δθ)}/{R(δθ) + R(−δθ)}, in order to reduce the nonlinearity of R(δθ). Figure 1 shows the optical schematic of a prototype sensor, with a laser diode as the light source and a pair of critical angle prisms and photodiodes detecting both R(δθ) and R(−δθ) simultaneously. The dimension of this sensor is 50×50×25 mm, and the weight 70g. Figure 2 displays a calibration curve of R(δθ) vers δθ, where δθ is detected by an autocollimator (Nikon-2). The nonlinearity is less than 1% and the resolution is far better than 0.1 second of arc. Theoretical analysis showed that a wide resolution and range of measurement can be designed to optimized by carefully choosing the central incident angle and the number of reflections within the critical angle prism.