Abstract:A high-precision linear displacement measurement method based on the digital phase shift of a single light source is proposed. In this method, the light intensity of a four-channel sinusoidal transmission surface with a 90° difference in the spatial phase is modulated by a single channel alternating light, and four-channel alternating light intensity signal with the same time phase can be obtained. Two channels of standing wave signals with a time difference of 90° are obtained through micro-control digital phase shift processing. After differential amplification, an electric travelling wave signal containing position information of measurement object is synthesized by these two standing wave signals. By measuring the phase difference between the travelling wave and the reference signal, the high precision linear displacement can be measured. The principle of displacement measurement based on the modulation of a single-alternating light field and the principle of digital phase-shift of micro-control are introduced in detail. The feasibility of the method is verified through experiments. Finally, the sensor is optimized by analyzing the causes of error, and the measurement accuracy of ±0.2 μm is achieved within the 100 mm range with a 0.6 mm grating period.

Noncontact measurement method of linear and angular displacement based on dual-beam feedback interferometric system

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Research on high-speed and non-contact angle detection based on laser measurement

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

A Dual-Beam Differential Method Based on Feedback Interferometry for Noncontact Measurement of Linear and Angular Displacement

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

A Novel Method to Simultaneously Measure the Straightness

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

Axial nano-displacement measurement with high resolution and wide range based on asymmetrical illumination.

Roll angle measurement based on common path compensation principle

Axial nanodisplacement measurement based on the double-helix point spread function generated using radially polarized beams with vortex phase modulation

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Modified Homodyne Laser Interferometer Based on Phase Modulation for Simultaneously Measuring Displacement and Angle.

Design of a high-precision and non-contact dynamic angular displacement measurement with dual-Laser Doppler Vibrometers

Research on precision linear displacement measurement method based on closed loop phase-shift control of single alternating light field

High-precision laser beam lateral displacement measurement based on differential wavefront sensing

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method