Abstract:Purpose – The purpose of this paper is to propose an innovative method to extend the operating range of the laser tracking system and improve the accuracy and automation of boresighting by designing a measurement instrument. Boresighting is a process that aligns the direction of special equipment with the aircraft reference axis. Sometimes the accurate measurement and adjustment of the equipment and the aircraft are hard to achieve. Design/methodology/approach – The aircraft is moved by an automatic adjustment system which consists of three numerical control positioners. For obtaining the position of the bore axis, an instrument with two measurement points is designed. Based on the multivariate normal distribution hypothesis, an uncertainty evaluation method for the aiming points is introduced. The accuracy of the measurement point is described by an uncertainty ellipsoid. A compensation and calibration method is proposed to decrease the effect of manufacturing error and deflection error by the finite element analysis. Findings – The experimental results of the boresighting measurement prove that the proposed method is effective and reliable in digital assembly. The measurement accuracy of the angle between the bore axis and the reference axis is about ±0.004°. In addition, the measurement result is mainly influenced by the position error of the instrument. Originality/value – The results of this study will provide a new way to obtain and control the installation deviation of part in aircraft digital assembly and will help to improve the precision and efficiency. This measurement method can be applied to obtain the axis of a deep blind hole.

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

A Novel Method to Simultaneously Measure the Straightness

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Research on high-speed and non-contact angle detection based on laser measurement

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

One-Dimensional Angle Measurement Error Calibration Technique for Fiber Optic Gyroscope

Roll angle measurement based on common path compensation principle

Novel Enhancing Resolution Method for Measurement Straightness Error

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

2D Micro-Angle Sensor Based on Laser Autocollimation

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser