Abstract:Abstract Error compensation has become an important means of improving the manufacturing and processing accuracy of computer numerical control (CNC) machine tools. Quick and precise measurement of the various geometric motion errors (GMEs) of CNC machine tools is crucial. We propose a novel laser method for the efficient and direct high-precision measurement of the 21 GMEs of a three-axis CNC machine tool, or three linear axes of a five-axis tool. A corresponding system was developed, comprising a fiber-coupled laser unit, sensor head, target unit, and beam-steering unit. The beam-steering unit was designed to perform high-accuracy 90° rotation of the measuring beam, and the target unit was designed to be sensitive to 18 GMEs of the three linear axes. Stability, repeatability, and comparison experiments were conducted to verify the performance of the proposed system. The results showed that the stability of the position error measurement is ± 6.3 nm. For straightness error measurement, the stability, repeatability error, and residual are within ± 60.3 nm, ± 0.5 μm, and ± 0.7 μm, respectively. These are within ± 0.12 arcsec, ± 0.5 arcsec, and ± 0.5 arcsec for the pitch and yaw measurements, and within ± 0.37 arcsec, ± 1.5 arcsec, and ± 1.0 arcsec for the roll measurements, respectively. For squareness error measurement, the repeatability error and residual are within ± 0.6 arcsec and ± 1.6 arcsec, respectively. Compared with a laser interferometer, the proposed system can measure the 21 GMEs of a three-axis machine tool with one-step installation. Without accuracy loss, the measurement efficiency is approximately 45 times higher than that of a laser interferometer, thus providing a new quick and accurate measurement method of GMEs and error compensation of CNC machine tools.

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

A Novel Method to Simultaneously Measure the Straightness

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Methods for Simultaneously Measuring Five-Dimension Information by Laser

Measuring Straightness Method with Common Path Compensation for Laser Drift

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

A Geometric Error Measurement System for Linear Guideway Assembly and Calibration

A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

A three-degrees-of-freedom motion error measurement system based on Mach–Zehnder interferometry

Five-Degrees-Of-Freedom Measurement System Based on A Monolithic Prism and Phase-Sensitive Detection Technique

Crosstalk Decoupling Measurement Method to Determine the Six Degrees of Freedom of Motion Error of Linear Stages

Straightness Measurement Based On Phase Sensitive Detection Technique