Abstract:Abstract The feasible resolution of angular displacement measurement by an optical angle sensor based on laser autocollimation is investigated. Improving the sensor sensitivity while maintaining the noise level of the sensor signal as low as possible is necessary to achieve high-resolution angular displacement measurement. In this paper, the contribution of each component, such as a photodiode, a trans-impedance amplifier, and an analog-to-digital converter in the optical angle sensor, to the noise level of the sensor signal is first estimated on the basis of theoretical equations. The feasible sensitivity of the optical angle sensor is also estimated in numerical calculations. The sensitivity of a photodiode element at the edge of its photosensitive area is evaluated in experiments to realize the estimation of the angle sensor sensitivity. Experimental results are applied to the numerical calculations. The influences of the measurement laser beam diameter, the spot diameter of the focused laser beam on the photosensitive area, and the focal length of the collimator objective of the optical angle sensor are also considered in the numerical calculations. Finally, a prototype optical setup is developed. Experiments are performed to demonstrate that a compact optical angle sensor based on laser autocollimation with a collimator objective having a focal length shorter than 100 mm can achieve a resolution beyond 0.001 arc-second with a bandwidth of 1 kHz. This resolution is better than those achieved by commercial autocollimators employing an image sensor or a position-sensitive detector. The industrial contribution of this paper lies in the detailed breakdown of noise components in the readout signal of an angle sensor in a practical condition and the systematic estimation of its feasible resolution as well as its sensitivity.

Measurement of the Displacement of Diffuse Surface with Low Reflectivity Using Angle Compensation Technique

Present Status of High Precision Laser Displacement Sensor Based on Triangulation

Research on high-speed and non-contact angle detection based on laser measurement

A High-Precision Laser Displacement Measurement System

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Status Of Laser Displacement Measurement Techniques Based On Triangulation

Research on a Novel Laser Displacement Sensor used for Gauge Measurement

A New Laser Displacement Sensor Based on Triangulation for Gauge Real-Time Measurement

Research on the Gauge Sensor Laser Spot

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Digitalization of Unknown Free-Form Surface Based on Variable-Direction Point Laser Sensor

Angle-compensation Sensor for Measuring the Shape of a Dragonfly Wing

Differential internal multi-reflection method for nano-displacement measurement

A New Method for Measuring the Thickness and Shape of A Thin Film Simultaneously by Combining Interferometry and Laser Triangulation

High Precision and Large Dynamic Range Measurement of Laser Triangulation Displacement Sensor Using Diffraction Grating

Noncontact measurement method of linear and angular displacement based on dual-beam feedback interferometric system

Feasible Resolution of Angular Displacement Measurement by an Optical Angle Sensor Based on Laser Autocollimation

Study on the measurement of in-plane displacement of solid surfaces by laser Doppler velocimetry

Precision Displacement Measurement with Nanometer Resolution Based on Transmissive Laser Air-Wedge Interference

Scanning Focus-Sensing Method for Measuring the Surface Shape of A Fish Scale

Multiple reflection assisted Laser Doppler Vibrometer setup for high resolution displacement measurement