Abstract:For spot scanning dark-field scattering technology, the defocus caused by the change in wafer surface height decreases the defect detection rate and size measurement repeatability. The demand for accurately and rapidly measuring the wafer surface height online is becoming increasingly urgent. The defect detection system integrates scattering, reflection, film, and topography defect detection channels. The integration of laser-triangulation-based defocus measurement into the bright-field optical path is proposed. The laser beam is directed onto the surface of the wafer, and the reflected light is transmitted through a lens onto the photosensitive surface of a four-quadrant detector. This detector captures both the strength and position of the reflected signal simultaneously. In this paper, a triangulation-modified model is established to obtain the height of each inspection spot on the wafer surface through the position signal of the reflected image. When the signal-to-noise ratio of the simulated reflection image position is 20 dB, the signal-to-noise ratio of the height measurement resolved by the triangulation-modified model is 41 dB, and the measurement error is less than 0.2 μm, indicating that the model has a noise suppression effect. The spot-scanning imaging system is established, and the height measurement results of the triangulation measurement model are verified using a laser interferometer. Within the travel range of 69 μm, the system has a measurement accuracy better than ±1 μm and a measurement repeatability better than ±0.2 μm, which meet the measurement requirements of the spot scanning imaging system. The system is utilized for defect detection and defocus measurement of the wafer surface, along with the motion mechanism, to accurately and rapidly obtain the height distribution of the wafer surface.

Scanning Focus-Sensing Method for Measuring the Surface Shape of A Fish Scale

Digitalization of Unknown Free-Form Surface Based on Variable-Direction Point Laser Sensor

Simultaneous Measurement of the Position and Shape of a Swimming Fish by Combining a Fringe Pattern Projection Method with a Laser Scanning Technique

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Multipoint Focus-Detecting Method for Measurement of Biological Nonsmooth Surface Topography

A Multiple-Scan Focusing Method for Radio Frequency Bulk Acoustic Wave Device Observation by Laser Probe System

A Multiple-Scan Focusing Method for RF BAW Device Observation by Laser Probe System

Scanning Beam Collimation Method for Measuring Dynamic Angle Variations Using an Acousto‐optic Deflector

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

A New Laser-Scanning Sensing Technique for Underwater Engineering Inspection

Dynamic scan detection of focal spot on nonplanar surfaces: Theoretical analysis and realization

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

Laser speckle method to measure small displacement in water

Focus Adjustment System of Laser Probe for Radio Frequency Surface and Bulk Acoustic Wave Devices

Multireference fringe-pattern projection method for measuring the shape of an object with spatially isolated surfaces

A New Multi-Probe Scanning Method For Measuring Optical Surface

Measurement of the Displacement of Diffuse Surface with Low Reflectivity Using Angle Compensation Technique

A tracking fringe method for measuring the shape and position of a swimming fish

Multi-Point Displacement Probe by Combining A Micro-Lens Array with an Acousto-Optic Deflector Scanner

Distance Measurement for Curved Surface Based on Confocal Technique