Abstract:For spot scanning dark-field scattering technology, the defocus caused by the change in wafer surface height decreases the defect detection rate and size measurement repeatability. The demand for accurately and rapidly measuring the wafer surface height online is becoming increasingly urgent. The defect detection system integrates scattering, reflection, film, and topography defect detection channels. The integration of laser-triangulation-based defocus measurement into the bright-field optical path is proposed. The laser beam is directed onto the surface of the wafer, and the reflected light is transmitted through a lens onto the photosensitive surface of a four-quadrant detector. This detector captures both the strength and position of the reflected signal simultaneously. In this paper, a triangulation-modified model is established to obtain the height of each inspection spot on the wafer surface through the position signal of the reflected image. When the signal-to-noise ratio of the simulated reflection image position is 20 dB, the signal-to-noise ratio of the height measurement resolved by the triangulation-modified model is 41 dB, and the measurement error is less than 0.2 μm, indicating that the model has a noise suppression effect. The spot-scanning imaging system is established, and the height measurement results of the triangulation measurement model are verified using a laser interferometer. Within the travel range of 69 μm, the system has a measurement accuracy better than ±1 μm and a measurement repeatability better than ±0.2 μm, which meet the measurement requirements of the spot scanning imaging system. The system is utilized for defect detection and defocus measurement of the wafer surface, along with the motion mechanism, to accurately and rapidly obtain the height distribution of the wafer surface.

Dynamic scan detection of focal spot on nonplanar surfaces: Theoretical analysis and realization

A lateral differential confocal microscopy for accurate detection and localization of edge contours

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

Detection of Defects in Optics Based on Scanning

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Realization of Autofocusing System for Laser Direct Writing on Non-Planar Surfaces.

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

High-Precision Small-Scale Laser Focal Spot Measurements

Focus detection by shearing interference of vortex beams for non-imaging systems.

Method for Measuring Laser Spot Center Based on Multi-Dimensional Reconstruction in Integrated Diagnostic System

In-fiber Illumination-Detection-synchronized Confocal Microscopy for High-Precision Fast Axial Scanning

Chromatic Confocal Sensor-Based Sub-Aperture Scanning and Stitching for the Measurement of Microstructured Optical Surfaces.

Distance Measurement for Curved Surface Based on Confocal Technique

An Adaptive Tracking Measurement Method for Inner Surface of Laser Fusion Targets

Adaptive-Tracking Laser Differential Confocal Freeform Surface Measurement with High Accuracy

Micro Detection System with nm Resolution Using Self-focal Confocal Microscope

Non-contact laser aiming detector based on half facular point optical imagery applied in coordinate measurement machine

Theoretical Analysis and Property Study of Optical Focus Detection Based on Differential Confocal Microscopy

Scanning Focus-Sensing Method for Measuring the Surface Shape of A Fish Scale

Real-time focus control in broad flat field laser material processing