Abstract:Abstract The feasible resolution of angular displacement measurement by an optical angle sensor based on laser autocollimation is investigated. Improving the sensor sensitivity while maintaining the noise level of the sensor signal as low as possible is necessary to achieve high-resolution angular displacement measurement. In this paper, the contribution of each component, such as a photodiode, a trans-impedance amplifier, and an analog-to-digital converter in the optical angle sensor, to the noise level of the sensor signal is first estimated on the basis of theoretical equations. The feasible sensitivity of the optical angle sensor is also estimated in numerical calculations. The sensitivity of a photodiode element at the edge of its photosensitive area is evaluated in experiments to realize the estimation of the angle sensor sensitivity. Experimental results are applied to the numerical calculations. The influences of the measurement laser beam diameter, the spot diameter of the focused laser beam on the photosensitive area, and the focal length of the collimator objective of the optical angle sensor are also considered in the numerical calculations. Finally, a prototype optical setup is developed. Experiments are performed to demonstrate that a compact optical angle sensor based on laser autocollimation with a collimator objective having a focal length shorter than 100 mm can achieve a resolution beyond 0.001 arc-second with a bandwidth of 1 kHz. This resolution is better than those achieved by commercial autocollimators employing an image sensor or a position-sensitive detector. The industrial contribution of this paper lies in the detailed breakdown of noise components in the readout signal of an angle sensor in a practical condition and the systematic estimation of its feasible resolution as well as its sensitivity.

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions

Ultra-precision angle sensor with a mode-locked laser source

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

2D Micro-Angle Sensor Based on Laser Autocollimation

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

A compact 2D micro-angle sensor

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

Optical Tilt Sensor with Direct Intensity-Modulated Scheme

Feasible Resolution of Angular Displacement Measurement by an Optical Angle Sensor Based on Laser Autocollimation

Optical Frequency Domain Angle Measurement in a Femtosecond Laser Autocollimator.

Laser autocollimation based on an optical frequency comb for absolute angular position measurement

1506 Determination of the origin position for an angle sensor with a femtosecond laser

Determination of the Zero-Position for an Optical Angle Sensor

Mode-locked Laser Autocollimator with an Expanded Measurement Range.

An Ultracompact Angular Displacement Sensor Based on the Talbot Effect of Optical Microgratings

A Laser Walk-off Sensor for High-Precision Low-Frequency Rotation Measurements.

Micro Angle Measurement for a Scanning Stage