Abstract:An optic-fiber vibration sensor based on the reflected 81° tilted fiber grating (81° TFG) integrated with a symmetrical flexible hinge is proposed and experimentally demonstrated in this paper. The vibration sensor is composed of a symmetrical flexible hinge and a reflected 81° TFG, the ends of which are simply fixed on the upper surface of the mass. The theoretical model of the proposed vibration sensor is analyzed, by which the important parameters related to the resonant frequency of the sensor are simulated and discussed; then, the vibration sensing experiments are conducted. Experiment results show that TE/TM mode of the 81° TFG can provide the maximal acceleration sensitivity of 338.28 and 299.94 mV/g at 400 Hz in the flat area of the amplitude-frequency response (50-400 Hz), which is increased by 9.95 and 11.5 times as compared with the optical fiber cantilever beam structure, respectively. Further, the signal-to-noise ratio in the flat area (50-400 Hz) is about ∼66.275dB under the acceleration of 2 g, which is increased by ∼20dB. Furthermore, it can be used for detecting mechanical vibration of medium-high frequency ranging from 50 to 3500 Hz. The proposed 81° TFG vibration sensor has the characteristics of small volume, simple package, high acceleration sensitivity, and wide vibration signal response range, which will ensure it has broad application prospects in the field of mechanical vibration.

Optical Tilt Sensor with Direct Intensity-Modulated Scheme

Optical Accelerometer Based On Grating Interferometer With Phase Modulation Technique

A High-Resolution Displacement Sensor Based on a Grating Interferometer with the Phase Modulation Technique

Nanometer-scale Displacement Sensor Based on Phase-Sensitive Diffraction Grating.

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions

Subnanometer Resolution Displacement Sensor Based on a Grating Interferometric Cavity with Intensity Compensation and Phase Modulation

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

A Compact Micromachined Interferometric Accelerometer Based on the Diffraction Grating

Optical Inertial Vibration Sensor System Using Grating Technology

Optical Inclinometer Based on a Single Long-Period Fiber Grating Combined with a Large Lateral Offset

A two-axis tilt sensor based on optics

An Ultracompact Angular Displacement Sensor Based on the Talbot Effect of Optical Microgratings

Optical wavefront phase-tilt measurement using Si-photonic waveguide grating couplers

Out-of-plane displacement sensor based on the Talbot effect in angular-modulated double-layer optical gratings

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

A Reflective Intensity Modulated Fiber Tilt Angle Sensor Based on an All-Photonic Crystal Fiber Interferometer

Temperature-insensitive tilt sensor with strain-chirped fiber Bragg gratings

Interferometric Fiber-Optic Tilt Sensor Exploiting Taper and Lateral-Offset Fusing Splicing

Development and investigation of an optical tilt sensor

Optic-fiber vibration sensor based on a reflected 81° tilted fiber grating integrated with a symmetrical flexible hinge