Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

A two-axis tilt sensor based on optics

Optical Tilt Sensor with Direct Intensity-Modulated Scheme

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Design of Omni-Directional Tilt Sensor Based on Machine Vision

Precise Two-Dimensional Tilt Measurement Sensor with Double-Cylindrical Mirror Structure and Modified Mean-Shift Algorithm for a Confocal Microscopy System

Development and investigation of an optical tilt sensor

Tilted Optics In 3d Vision Inspection Systems - Case Study

A compact 2D micro-angle sensor

Absolute Encoder-Based Dual Axis Tilt Sensor

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

2D Micro-Angle Sensor Based on Laser Autocollimation

Mechanics of Tunable Hemispherical Electronic Eye Camera Systems That Combine Rigid Device Elements with Soft Elastomers

Research for an intelligent double-axis tilt sensor

Optical Inclinometer Based on a Single Long-Period Fiber Grating Combined with a Large Lateral Offset

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

2d Micro Angle Sensor Based On Effect Of Internal Reflection

A Dual-Axis Optoelectronic Inclinometer Based on Wavefront Interference Fringes

Design of digital switch mode tilt sensor

Integrated Tilt Angle Sensing for Large Displacement Scanning MEMS Mirrors.