Abstract:Tilt sensors have been widely used in many applications, such as instrumentation leveling, oil drilling and structural health monitoring. With the rapid development of the micro-electromechanical system (MEMS) technology, MEMS accelerometer-based high-performance tilt sensors are capable of replacing conventional tilt sensors in most of application fields. High-sensitivity MEMS resonant accelerometers (MRAs) are fully qualified for tilt sensing. However, MRA chips have to be vacuum packaged and require complex circuits; therefore, they are difficult to be miniaturized and commercialized. In this case, this paper introduces a commercial-oriented capacitive MEMS accelerometer for tilt sensing with both high-resolution and compact size. The proposed MEMS sensor utilizes simplified fabrication processes, the area-change-based capacitive displacement transducer and the capacitance-to-voltage conversion application specific integrated circuit (ASIC) for low-cost, high-sensitivity, low power consumption and miniaturization. The developed MEMS sensor has a package dimension of 14 mm × 14 mm × 3.6 mm with a single +5 V power supply and analogue voltage output. Several evaluation experiments have been conducted with the results showing that the developed MEMS tilt sensor has a full measurement range of ±180°, a linear measurement range of ±30° with a nonlinearity of ±2.8%, a sensitivity of 33.6 mV/°, a noise floor of 2 × 10−4°/√Hz, a bandwidth of 100 Hz and an angle resolution of 7 × 10−4° with an integral time of 0.5 second. Compared with other commercial MEMS tilt sensors, the proposed sensor has a better resolution, a lower noise floor, a larger bandwidth, a lower power consumption and a smaller package. The simplified fabrication process and high performance suggest the developed MEMS tilt sensor is promising to be competitive in the market.

Research for an intelligent double-axis tilt sensor

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

A New Method to Eliminate the Misalignment Angle in Dynamic Goniometer Based on Fiber Optic Gyro

Design of Tilt-Sensor Based on Accelerometer

Theory And Error Compensation Method Based On The Tilt Sensor Adopted In Dynamic Angle Measurement Of The Fiber Optic Gyroscope

Optical Tilt Sensor with Direct Intensity-Modulated Scheme

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

High-Precision Attitude Angle Measuring System Based on Talbot Interferometry

A Biaxial Resonant Tilt Sensor with Two-Stage Microleverage Mechanisms

Sensor fusion for structural tilt estimation using an acceleration-based tilt sensor and a gyroscope

Tilt Sensor with Recalibration Feature Based on MEMS Accelerometer

Duplex Mode Tilt Measurements Based on a MEMS Biaxial Resonant Accelerometer

A two-axis tilt sensor based on optics

Design and Investigation of a High-Sensitivity Tilt Sensor Based on FBG

Precision tilting platform used for static calibration of accelerometers

Note: Differential amplified high-resolution tilt angle measurement system

A high-resolution area-change-based capacitive MEMS tilt sensor

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

The Study of a Novel Tilt Sensor Using Magnetic Fluid and Its Detection Mechanism