Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

Sensor fusion for structural tilt estimation using an acceleration-based tilt sensor and a gyroscope

Theory And Error Compensation Method Based On The Tilt Sensor Adopted In Dynamic Angle Measurement Of The Fiber Optic Gyroscope

Sensor Fusion for Structural Tilt Measurement using 3-axis Accelerometer and Gyroscope

Gyro-aided Camera-Odometer Online Calibration and Localization

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

Tilt Sensor with Recalibration Feature Based on MEMS Accelerometer

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors

Tightly Coupled Visual–Inertial Fusion for Attitude Estimation of Spacecraft

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

Optimal Weighted Fusion based on Recursive Least Squares for Dynamic North-Finding of MIMU on a Tilting Base

A Linear Fusion Algorithm for Attitude Determination Using Low Cost Mems-Based Sensors

An Adaptive Three-Axis Attitude Estimation Method Based on Multi-Sensor Fusion for Optoelectronic Platform

Adaptive Kalman Filter Enhanced With Spectrum Analysis for Wide-Bandwidth Angular Velocity Estimation Fusion

A Fusion Attitude Determination Method Based on Quaternion for MEMS Gyro/accelerometer/magnetometer

Intelligent real-time MEMS sensor fusion and calibration

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

Tilt estimator for 3D non-rigid pendulum based on a tri-axial accelerometer and gyrometer

Research for an intelligent double-axis tilt sensor

Buildings' Biaxial Tilt Assessment Using Inertial Wireless Sensors and a Parallel Training Model