Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Sic Symmetric Blocking Terminations Using Orthogonal Positive Bevel Termination And Junction Termination Extension

Orthogonal Positive-Bevel Termination for Chip-Size SiC Reverse Blocking Devices

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Bevel Junction Termination Extension—A New Edge Termination Technique for 4H-Sic High-Voltage Devices

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Area-Efficient Bevel-Edge Termination Techniques for SiC High-Voltage Devices

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv

Multiple P-Type SiC Micro-Island As Junction Termination Extension for 4H-Sic Schottky Barrier Diode

Development of G10kv 4H-Sic SBD Junction Extension Termination

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

Analysis of trench termination in 4H-nSiC based power devices

A Robust and Area-Efficient Guard Ring Edge Termination Technique for 4H-Sic Power MOSFETs

Design and Simulation of 600V 4H-Sic Superjunction JBS Diode

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

12.5 Kv SiC Gate Turn off Thyristor with Trench-Modulated JTE Structure

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

3.3 kV 4H-SiC Trench Semi-Superjunction Schottky Diode With Improved ON-State Resistance