Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Orthogonal Positive-Bevel Termination for Chip-Size SiC Reverse Blocking Devices

Sic Symmetric Blocking Terminations Using Orthogonal Positive Bevel Termination And Junction Termination Extension

Area-Efficient Bevel-Edge Termination Techniques for SiC High-Voltage Devices

Bevel Junction Termination Extension—A New Edge Termination Technique for 4H-Sic High-Voltage Devices

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Sidewall-Implanted Trench Termination for 4H-SiC Devices With High Breakdown Voltage and Low Leakage Current

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

A New Edge Termination Technique for SiC Power Devices

Bidirectional Current 4h‐sic VJFET

A Novel Technology for the Formation of A Very Small Bevel Angle for Edge Termination

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

A Robust and Area-Efficient Guard Ring Edge Termination Technique for 4H-Sic Power MOSFETs

Theoretical and Experimental Study of 13.4 kV/55 A SiC PiN Diodes with an Improved Trade-Off between Blocking Voltage and Differential On-Resistance

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Design and Fabrication of 1.2kv SBD Integrated 4hsic MOSFET for Reliable Reverse Conduction

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Vertical Β-Ga₂o₃ Schottky Barrier Diodes with Field Plate Assisted Negative Beveled Termination and Positive Beveled Termination

Multiple P-Type SiC Micro-Island As Junction Termination Extension for 4H-Sic Schottky Barrier Diode

Analysis of trench termination in 4H-nSiC based power devices

Design of bevel junction termination extension structure for high-performance vertical GaN Schottky barrier diode

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv