Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

A Novel Technology for the Formation of A Very Small Bevel Angle for Edge Termination

Avalanche breakdown of 4H-SiC diodes with edge terminated by a 2° positive bevel

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Design of bevel junction termination extension structure for high-performance vertical GaN Schottky barrier diode

A New Edge Termination Technique for SiC Power Devices

Low-noise Visible-Blind UV Avalanche Photodiodes with Edge Terminated by 2° Positive Bevel

Avalanche breakdown of 4H-SiC diodes with edge terminated by a 2/spl deg/ positive bevel

Design of vertical diamond Schottky barrier diode with a novel beveled junction termination extension

Design of Beveled Edge Termination in GaN Vertical P-I-n Diodes: A Simulation Study

Sidewall-Implanted Trench Termination for 4H-SiC Devices With High Breakdown Voltage and Low Leakage Current

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Highly Efficient Edge Terminations For Diamond Schottky Diodes

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Vertical Diamond p-n Junction Diode with Step Edge Termination Structure Designed by Simulation

A Novel Asymmetric Trench SiC Metal–Oxide–Semiconductor Field-Effect Transistor with a Poly-Si/SiC Heterojunction Diode for Optimizing Reverse Conduction Performance

Improved Etched Multistep JTE for UHV SiC Power Devices

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

Large Current Ni/4H-SiC SBDs with Field Plate and Implantation Edge Termination Technology

High-k Dielectric Assisted Trench Termination of the 4H-SiC Super Junction Device for Improved Avalanche Capability

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices