Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Design Consideration and Fabrication of 1.2-Kv 4H-Sic Trenched-And-Implanted Vertical Junction Field-Effect Transistors

Normally-off trench JFET technology in 4H silicon carbide

A High Performance 4H-Sic Normally-off VJFET

Design, Fabrication and Application of 4H-SiC Trenched-and-Implanted Vertical JFETs

Design Criteria of High-Voltage Lateral RESURF JFETs on 4H-Sic

4H-Sic Super-Junction JFET: Design and Experimental Demonstration

430-V 12.4- $hboxmomegacdot Hboxcm^2$ Normally off 4H-Sic Lateral JFET

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Numerical and Experimental Investigation on Bipolar Operation of 4H-SIC Normally-on Vertical JFETs

Characterization and Analysis of 4H-Sic Super Junction JFETs Fabricated by Sidewall Implantation

0.97 mΩcm2/820 V 4H-SiC Super Junction V-Groove Trench MOSFET

Fabricating and TCAD Optimization for a SiC Trench MOSFET With Tilted P-Shielding Implantation and Integrated TJBS

Switching Performance of Epitaxially Grown Normally-Off 4H-Sic Jfet

4H-Sic Trench-gate MOSFET with JTE Termination

Design and Characterization of 10 kV High Voltage 4H-SiC p-Channel IGBTs with Low VF

Development of High Temperature Lateral HV and LV JFETs in 4H-SiC

Novel Designed SiC Devices for High Power and High Efficiency Systems

Design and Application of High-Voltage SiC JFET and Its Power Modules

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

A Novel Low On-State Resistance Si/4H-SiC Heterojunction VDMOS with Electron Tunneling Layer Based on a Discussion of the Hetero-Transfer Mechanism

1000-V 9.1- $\hbox{m}\Omega \cdot \hbox{cm}^{2}$ Normally Off 4H-SiC Lateral RESURF JFET for Power Integrated Circuit Applications