Abstract:This study revisits the hole injection mechanism in quantum dot light‐emitting diodes. Bias voltage effectively reduces the energy barrier between the hole transport layer (HTL) and the quantum dots (QDs) and forms a triangular potential barrier at the HTL/QDs interface, allowing holes to be injected from the HTL to the QDs through thermally assisted tunneling. Injecting holes from the hole transport layer (HTL) into the quantum dot (QD) emitting layer in quantum dot light‐emitting diodes (QLEDs) is considered challenging due to the presence of a relatively high hole injection barrier at the HTL/QD interface. However, QLEDs with exceptional brightness and efficiency are achieved, prompting a reevaluation of the traditional hole injection mechanisms. This study examines the hole injection mechanism in QLEDs using a combination of experiments and simulations. The results demonstrate that the applied bias significantly reduces the barrier height between the highest occupied molecular orbital level of the HTL and the valence band (VB) of the QDs, facilitating hole injection. The bending of the lowest unoccupied molecular orbital energy level of the HTL at the HTL/QD interface confines electrons within the QD, effectively minimizing leakage current. Additionally, the triangle‐shaped potential barrier arising from the bending of the VB energy level of the QDs creates favorable conditions for hole–tunneling injection. Moreover, both simulations and experiments consistently demonstrate that the predominant pathway for hole injection from the HTL to the QDs in the QLED device involved thermally assisted tunneling. This study is important to understand the hole injection mechanism in QLEDs.

Hole Injection from the Sidewall of V-Shaped Pits into C-Plane Multiple Quantum Wells in Ingan Light Emitting Diodes

Deep Hole Injection Assisted By Large V-Shape Pits In Ingan/Gan Multiple-Quantum-Wells Blue Light-Emitting Diodes

Hole Transport Assisted by the Piezoelectric Field in In0.4Ga0.6N/GaN Quantum Wells under Electrical Injection

Efficient Hole Transport in Asymmetric Coupled Ingan Multiple Quantum Wells

Enhanced hole transport in InGaN/GaN multiple quantum well light-emitting diodes with a p-type doped quantum barrier

Electroluminescence from the InGaN/GaN Superlattices Interlayer of Yellow LEDs with Large V-Pits Grown on Si (111)

InGaN/GaN Multi-Quantum-Well and Light-Emitting Diode Based on V-pit-Shaped GaN Grown on Patterned Sapphire Substrate

Electroluminescence From The Sidewall Quantum Wells In The V-Shaped Pits Of Ingan Light Emitting Diodes

Carrier injection modulated by V-defects in InGaN/GaN multiple-quantum-well blue LEDs

Influence of Well Position on the Electroluminescence Characteristics of InGaN/GaN Single Quantum Well Red Light-Emitting Diodes

Effect of V-Shaped pits on optical properties of GaN-Based green light-emitting diodes

Mechanism Of Hole Injection Enhancement In Light-Emitting Diodes By Inserting Multiple Hole-Reservoir Layers In Electron Blocking Layer (Vol 119, 105703, 2016)

Carrier diffusion in long wavelength InGaN quantum well LEDs after injection through V-defects

Revisiting Hole Injection in Quantum Dot Light‐Emitting Diodes

High Hole Injection for Nitrogen-Polarity AlGaN-Based Deep-Ultraviolet Light-Emitting Diodes

Study on Carrier Transportation in InGaN Based Green LEDs with V-pits Structure in the Active Region

Hole Transport in C-Plane Ingan-Based Green Laser Diodes

A new structure of p-GaN/InGaN heterojunction to enhance hole injection for blue GaN-based LEDs

Influence of in Doping in GaN Barriers on Luminescence Properties of InGaN/GaN Multiple Quantum Well LEDs

Understanding the Luminescence Characteristics of Ultraviolet InGaN/AlGaN Multiple Quantum Wells with Different in Gradients

Enhanced Hole Transport of Nonpolar InGaN-based Light-emitting Diodes with Lateral P-Type Superlattice Doping Structure