Mechanism Of Hole Injection Enhancement In Light-Emitting Diodes By Inserting Multiple Hole-Reservoir Layers In Electron Blocking Layer (Vol 119, 105703, 2016)
Yukun Zhao,Feng Yun,Shuai Wang,Lungang Feng,Xilin Su,Yufeng Li,Maofeng Guo,Wen Ding,Ye Zhang
DOI: https://doi.org/10.1063/1.4948327
IF: 2.877
2016-01-01
Journal of Applied Physics
Abstract:In this study, gallium nitride (GaN) based light-emitting diodes (LEDs) with single and multiple hole-reservoir layers (HRLs) inserted in the electron-blocking layer (EBL) have been investigated numerically and experimentally. According to simulation results, a better electron confinement and a higher hole injection level can be achieved by the multiple HRLs inserted in the EBL region. To further reveal the underlying mechanism of hole injection enhancement experimentally, the active regions were intentionally designed to emit photons with three different wavelengths of 440 nm, 460 nm, and 480 nm, respectively. Based on the experimental results of photoluminescence (PL) and time-resolved PL (TRPL) measurements conducted at 298 K, the remarkable enhancement (148%) of PL intensities and significant increase in the decay times of the quantum wells close to p-GaN can be obtained. Therefore, the mechanism is proposed that carriers are able to reserve in the EBL region with multiple HRLs for a much longer time. Meanwhile, carriers could diffuse into the active region by tunnelling and/ or thermo-electronic effect and then recombine efficiently, leading to the better carrier reservoir effect and higher hole injection in LEDs. As a result, by inserting multiple HRLs in the EBL region instead of single HRL, the experimental external quantum efficiency is enhanced by 19.8%, while the serious droop ratio is markedly suppressed from 37.0% to 27.6% at the high current injection of 100 A/cm(2). (C) 2016 AIP Publishing LLC.