Abstract:An atomically thick AlN layer is typically used as the strain compensation layer (SCL) for InGaN-based-red light-emitting diodes (LEDs). However, its impacts beyond strain control have not been reported, despite its drastically different electronic properties. In this Letter, we describe the fabrication and characterization of InGaN-based red LEDs with a wavelength of 628 nm. A 1-nm AlN layer was inserted between the InGaN quantum well (QW) and the GaN quantum barrier (QB) as the SCL. The output power of the fabricated red LED is greater than 1 mW at 100 mA current, and its peak on-wafer wall plug efficiency (WPE) is approximately 0.3%. Based on the fabricated device, we then used numerical simulation to systematically study the effect of the AlN SCL on the LED emission wavelength and operating voltage. The results show that the AlN SCL enhances the quantum confinement and modulates the polarization charges, modifying the device band bending and the subband energy level in the InGaN QW. Thus, the insertion of the SCL considerably affects the emission wavelength, and the effect on the emission wavelength varies with the SCL thickness and the Ga content introduced into the SCL. In addition, the AlN SCL in this work reduces the LED operating voltage by modulating the polarization electric field and energy band, facilitating carrier transport. This implies that heterojunction polarization and band engineering is an approach that can be extended to optimize the LED operating voltage. We believe our study better identifies the role of the AlN SCL in InGaN-based red LEDs, promoting their development and commercialization.

Performance Improvement of GaN-based LEDs with Step Stage InGaN/GaN Strain Relief Layers in GaN-based Blue LEDs.

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

Performance Improvement of Gan-Based Near-Uv Leds with Ingan/Algan Superlattices Strain Relief Layer and Algan Barrier

Performance Improvement of Vlc System Using Gan-Based Leds with Strain Relief Layers

Performance Improvement of InGaN LEDs by Using Strain Compensated Last Quantum Barrier and Electron Blocking Layer

Performance Improvement of InGaN Red Light‐Emitting Diode by Using V‐Pits Layer and Step‐Graded GaN Barrier

Boosting the efficiency of InGaN-based green LEDs grown on Si through buffer strain engineering

Surface-plasmon-enhanced GaN-LED based on the multilayered rectangular nano-grating

Effect of the AlN strain compensation layer on InGaN quantum well red-light-emitting diodes beyond epitaxy

Performance Enhancement of Ingan-Based Light-Emitting Diodes with Ingan/Alinn/Ingan Composition-Graded Barriers

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Effect of strain relaxation on performance of InGaN/GaN green LEDs grown on 4-inch sapphire substrate with sputtered AlN nucleation layer

Analysis of the Mechanisms by Which Sputtered AlN Nucleation Layers Enhance the Performance of Red InGaN-based LEDs

633-Nm InGaN-based Red LEDs Grown on Thick Underlying GaN Layers with Reduced In-Plane Residual Stress

Performance Enhancement of Nitrogen-Polar GaN-based Light-Emitting Diodes Prepared by Metalorganic Chemical Vapor Deposition

High‐Brightness Blue Light‐Emitting Diodes Enabled by a Directly Grown Graphene Buffer Layer

Efficiency enhancement mechanism of piezoelectric effect in long-wavelength InGaN-based LED

Enhanced performance of GaN-based LEDs via electroplating of a patterned copper layer on the backside

The efficiency enhancement of InGaN-based red LEDs with thick GaN underlying layers

Internal quantum efficiency improvement of InGaN-based red LED by using double V-pits layers as strain relief layer

Strain‐Modulated Light Emission Properties in a Single InGaN/GaN Multiple‐Quantum‐Well Microwire‐Based Flexible Light‐Emitting Diode