Abstract:The development of AlGaN-based deep ultraviolet light emitting diodes (DUV-LEDs) is currently limited by poor external quantum efficiency (EQE) and wall-plug efficiency (WPE). Internal quantum efficiency (IQE), as an important component of EQE, plays a crucial role in improving the performance of DUV-LEDs. IQE is related to the carrier injection efficiency and the radiation recombination rate in the active region. In order to improve the IQE of AlGaN-based DUV-LEDs, this work proposes a scheme to optimize the period number of superlattice electron barrier layer (SL-EBL) to achieve better carrier injection efficiency and confinement capability. The effect of the period number of SL-EBL on the luminous efficiency, reliability and carrier recombination mechanism of AlGaN-based DUV-LEDs with an emission wavelength of 273 nm was investigated. The experimental results show that the light output power (LOP), external quantum efficiency (EQE) and wall-plug efficiency (WPE) of the DUV-LEDs tend to first increase and then decrease with the period number increase of the SL-EBL, while the leakage current decreases and the reliability is enhanced.The maximum EQE and WPE of the DUV-LED are 3.5% and 3.2%, respectively, at an injection current of 7.5 mA were achieved when the period number of SL-EBL was fixed at 7 (the thickness was 28 nm). Meanwhile, the numerical simulation results show that the electron potential barrier height is boosted with increasing the period number of SL-EBL, and the variation of the hole potential barrier height is negligible. Therefore, increasing the period number of SL-EBL is beneficial for shielding the dislocations and suppressing the leakage of electrons into the p-type layer, which improves the luminous efficiency and reliability of DUV-LEDs. However, when the period number of SL-EBL exceeds 7, the excessively thick hole potential barrier prevents the injection of holes into the activation region and degrades the radiative recombination efficiency. Therefore, EQE and WPE will show an inflection point with the variation of the period number of SL-EBL. In addition, to investigate the carrier recombination mechanism of the active region, the experimental EQE curves are fitted by the ABC model as well as the different slopes in logarithmic light output power-current ( L-I ) curves are calculated after aging. It can be found that increasing the period number of SL-EBL can effectively suppress the non-radiative combination of carriers in the active region. This investigation can provide an alternative way to enhance the photoelectric performance of DUV-LEDs.

Performance Improvement of InGaN LEDs by Using Strain Compensated Last Quantum Barrier and Electron Blocking Layer

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

Improvement of Radiative Recombination Rate and Efficiency Droop of InGaN Light Emitting Diodes with In‐Component‐Graded InGaN Barrier

Performance Improvement of Gan-Based Near-Uv Leds with Ingan/Algan Superlattices Strain Relief Layer and Algan Barrier

Performance Enhancement of Ingan-Based Light-Emitting Diodes with Ingan/Alinn/Ingan Composition-Graded Barriers

Efficiency and radiative recombination rate enhancement in GaN/AlGaN multi-quantum well-based electron blocking layer free UV-LED for improved luminescence

Performance Improvement of AlGaN-based Deep-Ultraviolet Light-Emitting Diodes Via Si-doping Design of Quantum Barriers

Improved Performance of Electron Blocking Layer Free AlGaN Deep Ultraviolet Light-Emitting Diodes Using Graded Staircase Barriers

Performance Improvement of InGaN Red Light‐Emitting Diode by Using V‐Pits Layer and Step‐Graded GaN Barrier

Numerical Investigation on the Performance Enhancement of InGaN/GaN Light‐Emitting Diodes with a Novel p‐i‐n Electron‐Blocking Layer

Effects of the P-Alingan/gan Superlattices' Structure on the Performance of Blue LEDs

Performance Improvement of GaN-based LEDs with Step Stage InGaN/GaN Strain Relief Layers in GaN-based Blue LEDs.

Polarization Modulation at Last Quantum Barrier for High Efficiency AlGaN-Based UV LED

Advantages of AlGaN-based Deep-Ultraviolet Light-Emitting Diodes with an Al-composition Graded Quantum Barrier.

Influence of the period number of superlattice electron barrier layer on the performance of AlGaN-based deep ultraviolet LED

Impact of Composite Last Quantum Barrier on the Performance of AlGaN-based Deep Ultraviolet Light-Emitting Diode

Effect of the AlN strain compensation layer on InGaN quantum well red-light-emitting diodes beyond epitaxy

The marvelous optical performance of AlGaN-based deep ultraviolet light-emitting diodes with AlInGaN-based last quantum barrier and step electron blocking layer

Effect of periodically varying chirped AlxInyGa(1-x-y)N/ Al0.70Ga0.30N Super-Lattice based electron blocking region for nearly droop free UV-C LEDs

High-performance AlGaN-based deep ultraviolet light-emitting diodes with different types of InAlGaN/AlGaN electron blocking layer

Machine learning study on superlattice electron blocking layer design for AlGaN deep ultraviolet light-emitting diodes using the stacked XGBoost/LightGBM algorithm