Abstract:The development of AlGaN-based deep ultraviolet light emitting diodes (DUV-LEDs) is currently limited by poor external quantum efficiency (EQE) and wall-plug efficiency (WPE). Internal quantum efficiency (IQE), as an important component of EQE, plays a crucial role in improving the performance of DUV-LEDs. IQE is related to the carrier injection efficiency and the radiation recombination rate in the active region. In order to improve the IQE of AlGaN-based DUV-LEDs, this work proposes a scheme to optimize the period number of superlattice electron barrier layer (SL-EBL) to achieve better carrier injection efficiency and confinement capability. The effect of the period number of SL-EBL on the luminous efficiency, reliability and carrier recombination mechanism of AlGaN-based DUV-LEDs with an emission wavelength of 273 nm was investigated. The experimental results show that the light output power (LOP), external quantum efficiency (EQE) and wall-plug efficiency (WPE) of the DUV-LEDs tend to first increase and then decrease with the period number increase of the SL-EBL, while the leakage current decreases and the reliability is enhanced.The maximum EQE and WPE of the DUV-LED are 3.5% and 3.2%, respectively, at an injection current of 7.5 mA were achieved when the period number of SL-EBL was fixed at 7 (the thickness was 28 nm). Meanwhile, the numerical simulation results show that the electron potential barrier height is boosted with increasing the period number of SL-EBL, and the variation of the hole potential barrier height is negligible. Therefore, increasing the period number of SL-EBL is beneficial for shielding the dislocations and suppressing the leakage of electrons into the p-type layer, which improves the luminous efficiency and reliability of DUV-LEDs. However, when the period number of SL-EBL exceeds 7, the excessively thick hole potential barrier prevents the injection of holes into the activation region and degrades the radiative recombination efficiency. Therefore, EQE and WPE will show an inflection point with the variation of the period number of SL-EBL. In addition, to investigate the carrier recombination mechanism of the active region, the experimental EQE curves are fitted by the ABC model as well as the different slopes in logarithmic light output power-current ( L-I ) curves are calculated after aging. It can be found that increasing the period number of SL-EBL can effectively suppress the non-radiative combination of carriers in the active region. This investigation can provide an alternative way to enhance the photoelectric performance of DUV-LEDs.

Effect of periodically varying chirped AlxInyGa(1-x-y)N/ Al0.70Ga0.30N Super-Lattice based electron blocking region for nearly droop free UV-C LEDs

Efficiency droop free UV-C LED by introducing p-doped LQB and p-n-p-n-p doped AlGaN hole injection layer

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

Efficiency and radiative recombination rate enhancement in GaN/AlGaN multi-quantum well-based electron blocking layer free UV-LED for improved luminescence

Improved Performance of Electron Blocking Layer Free AlGaN Deep Ultraviolet Light-Emitting Diodes Using Graded Staircase Barriers

Enhanced hole concentration in strain-compensated BAlN/AlGaN superlattice for deep ultraviolet light-emitting diodes

Performance Improvement of Gan-Based Near-Uv Leds with Ingan/Algan Superlattices Strain Relief Layer and Algan Barrier

Effect of Highly Doped p-AlGaN Layer to Improve the Ultimate Performance Parameters of 275 nm AlGaN-based UV-C LED

Performance Improvement of InGaN LEDs by Using Strain Compensated Last Quantum Barrier and Electron Blocking Layer

High-performance electron-blocking-layer-free deep ultraviolet light-emitting diodes implementing a strip-in-a-barrier structure

Polarization Modulation at Last Quantum Barrier for High Efficiency AlGaN-Based UV LED

Polarization Engineered p-Type Electron Blocking Layer Free AlGaN Based UV-LED Using Quantum Barriers with Heart-Shaped Graded Al Composition for Enhanced Luminescence

Intelligent Optimization Design of Electron Barrier Layer for AlGaN-based Deep-Ultraviolet Light-Emitting Diodes

AlGaN-Based DUV LEDs With Al-Composition-Engineered AlGaN Superlattice Inserted at the p-EBL/Hole Supplier Interface

Suppressing the efficiency droop in AlGaN-based UVB LEDs

Influence of the period number of superlattice electron barrier layer on the performance of AlGaN-based deep ultraviolet LED

Performance Enhancement of AlGaN-based Ultraviolet Light-Emitting Diodes by Tailoring Polarization in Electron Blocking Layer

The Influences of Sputtered AlN Buffer Layer on AlInGaN Based Blue and Near‐ultraviolet Light Emitting Diodes

Performance Enhancement of Ingan-Based Light-Emitting Diodes with Ingan/Alinn/Ingan Composition-Graded Barriers

Greatly Enhanced Performance of AlGaN-based Deep Ultraviolet Light Emitting Diodes by Introducing a Polarization Modulated Electron Blocking Layer.

Lower current density driven InGaN/GaN micro-LED with improved quantum efficiency