Abstract:Single LiNbO3 (LNO) crystals are widely utilized in surface acoustic wave devices, optoelectronic devices, and novel ferroelectric memory devices due to their remarkable electro-optic and piezoelectric properties, and high saturation and remnant polarizations. However, challenges remain regarding their nanofabrication that hinder their applications. The prevailing etching techniques for LNO encompass dry etching, wet etching, and focused-ion-beam etching, each having distinct merits and demerits. Achieving higher etching rates and improved sidewall angles presents a challenge in LNO nanofabrication. Building upon the current etching researches, this study explores various etching methods using instruments capable of generating diverse plasma densities, such as dry etching in reactive ion etching (RIE) and inductively coupled plasma (ICP), proton exchange-enhanced etching, and wet chemical etching following high-temperature reduction treatment, as well as hybrid dry and wet etching. Ultimately, after employing RIE dry etching combined with wet etching, following a high-temperature reduction treatment, an etching rate of 10 nm/min and pretty 90° sidewall angles were achieved. Furthermore, high etching rates of 79 nm/min with steep sidewall angles of 83° were obtained using ICP dry etching. Additionally, using SiO2 masks, a high etching rate of 108 nm/min and an etching selectivity ratio of 0.86:1 were achieved. Distinct etching conditions yielded diverse yet exceptional results, providing multiple processing paths of etching for the versatile application of LNO.

Dry etching of LiNbO3 using inductively coupled plasma

Lithium niobate ridge waveguides by nickel diffusion and proton-exchanged wet etching

Rib and strip chalcogenide waveguides based on Ge-Sb-Se radio-frequency sputtered films

Advanced Etching Techniques of LiNbO3 Nanodevices

A Parametric Study of ICP-RIE Etching on a Lithium Niobate Substrate

Deep groove etching for partial reflectors in InP-based monolithically integrated photonic devices

Lithium–Niobate Channel Waveguide for the Realization of Long-Period Gratings

Fabrication of GaN‐based Ridge Waveguides with Very Smooth and Vertical Sidewalls by Combined Plasma Dry Etching and Wet Chemical Etching

Isotropic atomic layer etching of MgO-doped lithium niobate using sequential exposures of H$_2$ and SF$_6$ plasmas

Smooth Etching of Epitaxially Grown AlN Film by Cl2/BCl3/Ar-based Inductively Coupled Plasma

Gan-Based Ridge Waveguides With Very Smooth And Vertical Sidewalls By Icp Dry Etching And Chemical Etching

Smooth and Vertical Etching of GaAs/GaInP/AlGaInP Using Inductively Coupled Cl2/BCl3/CH4 Plasma

Good-Quality and High-Efficiency Dicing for Thick LiNbO3 Wafers Using Picosecond Laser Pulses

Fabrication of single-mode ridge SU-8 waveguides based on inductively coupled plasma etching

Nanoscale Ge Fin Etching Using Inductively Coupled Plasma For Ge-Based Multi-Gate Devices

NOVEL ETCHING TECHNOLOGY OF INP BY INDUCTIVELY COUPLED PLASMA1

Redeposition-free inductively-coupled plasma etching of lithium niobate for integrated photonics

Investigation of etching two-dimensional microhole lattice array on lithium niobate with focused ion beam for fabricating photonic crystals

Sub-damage-threshold plasma etching and profile tailoring of Si through laser-stimulated thermal desorption

Deep InP gratings for opto-electronic devices etched by Cl 2/CH 4/Ar inductively coupled plasma