Abstract:In this work, we use femtosecond laser direct writing to fabricate two kinds of modified structures with opposite refractive index changes to build new dual-line waveguide configurations in z-cut LiNbO 3 (LN) crystals for the first time. These hybrid-structure waveguides, in which type-I modifications are induced between two type-II tracks have been investigated by an end-face coupling system at 532 nm. The results indicate that TEM 00 mode is the only transmission mode for all waveguides. Comparing with the single-modification waveguides, experimental results indicate that the new waveguides in which type-II tracks with 12 μm interval exhibit lower transmission losses (about 0.98 dB/cm). The reasons for these interesting guiding performances are analyzed by the confocal micro-Raman results. The beam quality is measured in both directions (x and y) and also in the visible (532 nm) and infrared (1064 nm) regions. This work provides a new perspective for improving the transmission efficiency of waveguides, which is the new hybrid structure in LN crystals. The new-waveguides design method has potential application in the field of photonic chips.

Lithium–Niobate Channel Waveguide for the Realization of Long-Period Gratings

Photorefractive Long-Period Waveguide Grating Filter in Lithium Niobate Strip Waveguide

Wavelength Converter Based on Linearly Chirped Gratings in Lithium Niobate Through Cascaded Second-Order Processes

High-Efficiency and Polarization-Insensitive Grating Couplers on Thin-Film Lithium Niobate Waveguides

Channel Waveguides in Lithium Niobate and Lithium Tantalate

High-efficiency hybrid amorphous silicon grating couplers for sub-micron-sized lithium niobate waveguides.

Sub-Micron Periodically-Poled Lithium Niobate Waveguide For Integrated Nonlinear Optics

Electrically Generated Optical Waveguide in a Lithium-Niobate Thin Film.

Optical Characterization and Stability Study of LiNbO3 Optical Waveguides Fabricated by Buffered Acid

Quasi-Phase Matching in Periodically-Grooved Thin-Film Lithium Niobate Waveguides

Lithium niobate ridge waveguides by nickel diffusion and proton-exchanged wet etching

Long Low-Loss-Litium Niobate on Insulator Waveguides with Sub-Nanometer Surface Roughness

Low-Dose Ion Implanted Active Waveguides in Nd3+ Doped Near-Stoichiometric Lithium Niobate: Promising Candidates for Near Infrared Integrated Laser

LiNbO3 Waveguide with Embedded Ag Nanowire and 3L MoS2 for Strong Light Confinement and Ultra-Long Propagation Length in the Visible Spectral Range.

Fabrication of Polarization-Independent Single-Mode Waveguides in Lithium Niobate Crystal with Femtosecond Laser Pulses

Fabrication of Polarization-Independent Waveguides Deeply Buried in Lithium Niobate Crystal Using Aberration-Corrected Femtosecond Laser Direct Writing

High-performance femtosecond-laser microfabricated lattice-like-cladding waveguides in Er 3+ and MgO co-doped LiNbO 3 crystals for multi-wavelength guidance and luminescence

Fabrication of Waveguide with Ferroelectric-Domain Structure on Electro-Optical Crystal Slice

Low-loss chalcogenide waveguides on lithium niobate for the mid-infrared

New channel guiding structures via femtosecond laser direct writing z-cut LiNbO 3 crystals