Abstract:Summary form only given. Recently, the state-of-the-art of lithium-niobate-on-insulator (LNOI) has been reviewed [1]. In analogy to silicon-on-insulator (SOI), the new material platform for integrated optics with wafers of up to 3” diameter enables the fabrication of optical waveguides with small cross-sections and small bending radii due to the high refractive index contrast. As a consequence, ultra-compact photonic integrated devices such as ring resonators and photonic crystal structures have been developed.Here we demonstrate also Er-doped LNOI, which might become an ideal material for nano-optical amplifiers and lasers. Doping is achieved by pre-diffusion of Er into the upper LN wafer before bonding [2], and the resulting Er concentration is about 1020 cm-3. Ridges of different width w = (2.5 - 10) μm were fabricated on these LNOI substrates (LN thickness of 960 nm) using precision diamond-blade dicing which results in smooth side walls of the fabricated waveguides. We present results of a first investigation of the erbium centers using Raman and fluorescence spectroscopy of planar and ridge waveguides in Er:LNOI.Characterization of the waveguides was performed using Raman and fluorescence spectroscopy. Spectral scans were obtained using a scanning confocal microscope and a 488 nm laser. Besides line broadening that may be attributed to internal strain in the bonded layer, analysis of the Raman spectrum shows no significant difference between the waveguide and the bulk material. However, the erbium emission of the 4H15/2 and 4S3/2 to the 4I15/2 contains several differences in the intensity ratios indicating that the relative transition probabilities are different for the smart cut waveguide. While Raman intensity has a linear relationship with pump power, the intensity of the Er emission starts saturating at pump levels of only a few mW. To investigate fluorescence of the 4I13/2 - 4I15/2 transition inside the formed ridges, a fiber coupled lase- with a wavelength of 980 nm is used for pumping. The rhs of the figure above shows a diced ridge and the green fluorescence that can be observed when the ridge is pumped at 980 nm. An example of the IR fluorescence is given on the right of the above figure using 40 mW of pump light, with the spectrum of an erbium doped fiber as a reference. The emission is broadened and maxima are shifted to longer wavelengths, which may be attributed to defects induced by implantation, re-absorption of fluorescence light, and contributions by amplified spontaneous emission due to the waveguiding effect.

Lithium niobate ridge waveguides by nickel diffusion and proton-exchanged wet etching

Monolithic Integration of a Lithium Niobate Microresonator with a Free-Standing Waveguide Using Femtosecond Laser Assisted Ion Beam Writing.

Lithium–Niobate Channel Waveguide for the Realization of Long-Period Gratings

Monolithic Integration of a High-Quality Factor Lithium Niobate Microresonator with a Free-Standing Membrane Waveguide Using Femtosecond Laser Assisted Ion Beam Writing (FLAIBW)

Optical Characterization and Stability Study of LiNbO3 Optical Waveguides Fabricated by Buffered Acid

Lithium niobate ridged waveguides with smooth vertical sidewalls fabricated by an ultra-precision cutting method

Locally Periodically Poled LNOI Ridge Waveguide for Second Harmonic Generation [Invited]

Fabrication of GaN‐based Ridge Waveguides with Very Smooth and Vertical Sidewalls by Combined Plasma Dry Etching and Wet Chemical Etching

Optimization of waveguide fabrication processes in lithium-niobate-on-insulator platform

Low-loss Lithium Niobate on Insulator (LNOI) Waveguides of a 10 cm-length and a Sub-nanometer Surface Roughness

Long Low-Loss-Litium Niobate on Insulator Waveguides with Sub-Nanometer Surface Roughness

Electrically Generated Optical Waveguide in a Lithium-Niobate Thin Film.

Photorefractive Long-Period Waveguide Grating Filter in Lithium Niobate Strip Waveguide

A ridge waveguide constructed by H+ implantation and precise diamond blade dicing in high-gain Nd3+-doped laser glass

Fluorescence in planar and ridge waveguides fabricated in Erbium-Doped lithium-niobate-on-insulator (Er:LNOI)

Polarization Coupling of $X$ -Cut Thin Film Lithium Niobate Based Waveguides

High-index overlay for high reflectance DBR gratings in LiNbO/sub 3/ channel waveguides

Fabrication of low-loss lithium niobate on insulator waveguides on the wafer scale

Fabrication and Characterization of Ion-Exchanged Optical Waveguides in Potassium Lithium Niobate Crystal Substrates

Fabrication of Sub-200 Nm AlN-GaN-AlN Waveguide with Cleaved End Facet

Channel Waveguides in Lithium Niobate and Lithium Tantalate